LEVER HOLDER AS. 2U7209 - Caterpillar

2U7209 LEVER HOLDER AS. Caterpillar parts D25D, D300D, D40D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2U7209
2U-7209
2U7209

Weight: 0.39 pounds 0 kg.

Buy LEVER HOLDER AS. 2U7209 Caterpillar genuine, new aftermarket tractor parts with delivery
ARTICULATED TRUCK,

Compatible equipment models: 2U7209:

ARTICULATED TRUCK D25D D300D D40D Caterpillar

Number on catalog scheme: 4

Caterpillar 2U7209 Parts scheme LEVER HOLDER AS.

For full view, you need register

Information:

Illustration 1 g00763940
Close the jaw of the shear.
Place the shear on the ground.
Turn off the engine of the host machine. Release the hydraulic pressure in the hydraulic system. Refer to the "Service Manual" of the host machine for the proper procedure to release the hydraulic pressure.
Clean the fittings with a clean rag before you lubricate the fittings.Note: In order to access the fittings on the pin for the cutting jaw, you must remove two caps. There is one cap on each side of the pin.
Lubricate the five grease fittings. There are two fittings on the pivot pin for the cylinder (1). There is one fitting on the end of the cylinder (2). There are two fittings on the pin for the cutting jaw (3) .