AVSPARE.COM
parts catalog

LEVER AS 3236580 - Caterpillar



3236580 LEVER AS Caterpillar parts LEVER
Rating:
31
Alternative (cross code) number:
CA3236580
323-6580
3236580
Caterpillar 3236580 LEVER AS

Buy LEVER AS 3236580 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Start By:
Remove the oscillating axle.
Illustration 1 g06293029
Remove bolts (2) and cover (3) from trunnion support (1).
Illustration 2 g06293030
Remove thrust washer (4), bolts (5), and plate (6) from the end of the trunnion. Remove thrust washer (4) that is behind plate (6).
Illustration 3 g06293031
Attach a suitable lifting device to trunnion support (1). The weight of trunnion support (1) is approximately 47 kg (104 lb). Remove trunnion support (1) from the trunnion.
Illustration 4 g06293047
Remove lip seal (7) and sleeve bearing (8) from trunnion support (1).
Illustration 5 g06293048
Use two people to remove trunnion (10). The weight of trunnion (10) is approximately 26 kg (57 lb). Remove bolts (9) and trunnion (10).Installation Procedure
Illustration 6 g06293048
Apply Tooling (B) on the mating surface between trunnion (10) and the axle housing.
Use two people to install trunnion (10). The weight of trunnion (10) is approximately 26 kg (57 lb).
Install trunnion (10) and bolts (9). Tighten bolts (9) to a torque of 300 40 N m (220 30 lb ft).
Illustration 7 g06293059
Illustration 8 g06293054
Use a suitable press and Tooling (A) to install sleeve bearing (8) in trunnion support (1). Install sleeve bearing (8).
Illustration 9 g06293065
(1) Trunnion support
(7) Lip seal
(8) Sleeve bearing
(10) Trunnion
Illustration 10 g06293066Note: Lip seal (7) must be installed so that the sealing lip is facing toward the outside of trunnion support (1).
Use Tooling (A) to install lip seal (7) in trunnion support (1). Install lip seal (7).
Illustration 11 g06293031
Attach a suitable lifting device to trunnion support (1). The weight of trunnion support (1) is approximately 47 kg (104 lb). Install trunnion support (1) on the trunnion
Illustration 12 g06293030
Install thrust washer (4), plate (6), thrust washer (4), and bolts (5). Tighten bolts (5) to a torque of 570 80 N m (420 60 lb ft).
Illustration 13 g06293029
Install cover (3) and bolts (2) on trunnion support (1). Tighten bolts (2) to a torque of 300 40 N m (220 30 lb ft).End By:
Install the oscillating axle.


Parts lever Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.