LEVER AS-CONTROL 3830512 - Caterpillar

Removal Procedure
Illustration 1 g00997100
Loosen nut (6) that attaches oil line (1) to the cylinder block.
Remove banjo bolt (3) and remove washers (2) from the cylinder block.
Remove oil pressure switch (4) and remove adapter (5) from the cylinder head. Remove washers (not shown).
Remove oil line (1) from the engine.Installation Procedure
Illustration 2 g00997100
Position oil line (1) on the engine.
Position oil pressure switch (4), adapter (5), and washers on oil line (1). Install the oil line to the cylinder block.
Position banjo bolt (3) and washers (2) to oil line (1). Install the oil line to the cylinder head.
Tighten nut (6) that attaches oil line (1) to the cylinder block.
Tighten oil pressure switch (4) to 10 N m (90 lb in).
Tighten banjo bolt (3) to 12 N m (105 lb in).