3S9929 LEVER Caterpillar parts
941, 951B, D4D
Rating:
Alternative (cross code) number:
CA3S9929
3S-9929
3S9929
CA3S9929
3S-9929
3S9929
Weight: 0.40 pounds 0 kg.
Information:
ARM OFFSET DIMENSION
5.461
mm
AXIS CENTERLINE TO CENTERLINE DIMENSION
63.5
mm
AXIS OFFSET DIMENSION
0
mm
FULCRUM HOLE DIAMETER
19.101
mm
FULCRUM PITCH DIAMETER
0
mm
LINKAGE HOLE DIAMETER
6.045
mm
TRACK LOADER, TRACK-TYPE TRACTOR,
Information:
Probable Causes
Loose alternator drive belt
Loose alternator drive pulley
Charging circuit
Regulator is defective
Rectifier is defective
Brushes are worn or dirtyRecommended Actions
Loose Alternator Drive Belt
Inspect the condition of the alternator drive belts. If the alternator drive belts are worn or damaged, replace the belts.
Check the tension on the alternator drive belts. Adjust the tension, if necessary.Loose Alternator Drive Pulley
Check the key groove in the pulley for wear. If the groove is worn, install a new pulley. Tighten the pulley nut to the correct torque. Refer to Specification for the correct torque.Charging Circuit
Inspect the battery cables, wiring, and connections in the charging circuit. Clean all connections and tighten all connections. Replace any faulty parts.Regulator is Defective
Install a new regulator assembly.Rectifier is Defective
Install a new rectifier.Brushes are Worn Or Dirty
Install new brushes.
Loose alternator drive belt
Loose alternator drive pulley
Charging circuit
Regulator is defective
Rectifier is defective
Brushes are worn or dirtyRecommended Actions
Loose Alternator Drive Belt
Inspect the condition of the alternator drive belts. If the alternator drive belts are worn or damaged, replace the belts.
Check the tension on the alternator drive belts. Adjust the tension, if necessary.Loose Alternator Drive Pulley
Check the key groove in the pulley for wear. If the groove is worn, install a new pulley. Tighten the pulley nut to the correct torque. Refer to Specification for the correct torque.Charging Circuit
Inspect the battery cables, wiring, and connections in the charging circuit. Clean all connections and tighten all connections. Replace any faulty parts.Regulator is Defective
Install a new regulator assembly.Rectifier is Defective
Install a new rectifier.Brushes are Worn Or Dirty
Install new brushes.
Cat SIS web machinery list:
Parts lever Caterpillar catalog:
8H2003
LEVER
561B
561B
7S3939
LEVER
140
140
7S3934
LEVER
140
140
3S8806
LEVER
D5
D5
3S8808
LEVER
D5
D5
5K0010
LEVER
140, 141, 191
140, 141, 191
5K4724
LEVER
140, 141, 191
140, 141, 191
3K4710
LEVER (LEFT HAND)
941, 955H, D4D
941, 955H, D4D
3K4709
LEVER (RIGHT HAND)
941, 955H, D4D
941, 955H, D4D