LEVER 4E3454 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench Assembly 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06214949
Use Tooling (A) to remove fuel filters (2) from fuel filter base (1).
Illustration 2 g06215313
Disconnect hose assemblies (3), from fuel filter base (1). Immediately cap all openings or plug all openings to prevent contamination.
Remove bolts (4), the washers, and the nuts. Remove fuel filter base (1) from the bracket .Installation Procedure
Illustration 3 g06215313
Position fuel filter base (1) on the bracket and install bolts (4), the washers, and the nuts.
Connect hose assemblies (3) to fuel filter base (1).
Illustration 4 g06214949
Install fuel filters (2) on fuel filter base (1). Refer to the Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace" topic for more information.
Prime the fuel system. Refer to the Operation and Maintenance Manual, "Fuel System - Prime" topic for more information.