LEVER 4W0096 - Caterpillar

Illustration 72 g06275810
Install plugs (37) and the O-ring seals.
Illustration 73 g06275808
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (36), spool (35), O-ring seal (34), plate (33), and bolts (32).
Illustration 74 g06275805
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (31), O-ring seal (30), and cartridge assembly (29). Tighten cartridge assembly (29) to a torque of 35 3 N m (26 2 lb ft).
Illustration 75 g06275803
Install coil assembly (28), the washer, and nut (27). Tighten nut (27) to a torque of 20 3 N m (177 27 lb in).
Illustration 76 g06275801
Install bracket assembly (25) and bolts (26).
Illustration 77 g06275799
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retainer (23), spring (22), O-ring seal (21), cover (20), and bolts (19) onto the pump body.
Illustration 78 g06271558
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Attach a suitable lifting device to pump head (14) The weight of pump head (14) is approximately 47 kg (104 lb). Install pump head (14), bolts (11), bolts (10), and the washers onto the pump body. Tighten bolts (10) and (11) to a torque of 270 40 N m (199 30 lb ft).
Install pins (13) and retaining ring (12).
Illustration 79 g06270771
Install impeller (9), spacer (8), and retaining ring (7).
Illustration 80 g06270698
Install cover (6) and bolts (5).
Illustration 81 g06270697
Install O-ring seal (3) and coupling (4).
Illustration 82 g06270680
Attach a suitable lifting device to pump assembly (2). The weight of pump assembly (2) is approximately 125 kg (276 lb). Install pump assembly (2) to the front pump. Install bolts (1). Tighten bolts (1) to a torque of 270 40 N m (199 30 lb ft).End by:Install the piston pump (implement).