5D8555 LEVER Caterpillar parts
14E, 16
Rating:
Alternative (cross code) number:
CA5D8555
5D-8555
5D8555
CA5D8555
5D-8555
5D8555
Weight: 1 pounds 0 kg.
MOTOR GRADER,
Number on catalog scheme:
5
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install" for the correct procedure.
Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02895676
Remove banjo bolt (2) and piston cooling jet (1) from the cylinder block.
Repeat Step 1 in order to remove the remaining piston cooling jets. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02895676
Clean the piston cooling jets and inspect the piston cooling jets for damage. Replace any damaged piston cooling jets. The procedure for checking that the alignment of the piston cooling jets is described in Specifications, "Piston Cooling Jet Alignment".
Install banjo bolt (2) to piston cooling jet (1). Install the piston cooling jet assembly into the recess in the cylinder block.
Tighten banjo bolt (2) to a torque of 18 N m (159 lb in).
Repeat Step 2 through Step 3 for the remaining piston cooling jets. End By:
Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install" for the correct procedure.
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install" for the correct procedure.
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install" for the correct procedure.
Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02895676
Remove banjo bolt (2) and piston cooling jet (1) from the cylinder block.
Repeat Step 1 in order to remove the remaining piston cooling jets. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02895676
Clean the piston cooling jets and inspect the piston cooling jets for damage. Replace any damaged piston cooling jets. The procedure for checking that the alignment of the piston cooling jets is described in Specifications, "Piston Cooling Jet Alignment".
Install banjo bolt (2) to piston cooling jet (1). Install the piston cooling jet assembly into the recess in the cylinder block.
Tighten banjo bolt (2) to a torque of 18 N m (159 lb in).
Repeat Step 2 through Step 3 for the remaining piston cooling jets. End By:
Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install" for the correct procedure.
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install" for the correct procedure.
Caterpillar parts catalog:
Parts lever Caterpillar catalog:
1090, 1140, 1150, 1160, 1190, 1190T, 120M, 120M 2, 1290T, 12E, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1673, 1673B,...
16, 572G, 772, 773, D7F, D8H, D8K
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 16, 160G, 160H, 160H ES, 160H N...
120B, 140, 140B, 14E
4D7833
LEVER
16
16
4D7832
LEVER
16
16
4D7831
LEVER
16
16
5J0001
LEVER
16
16
5D8556
LEVER (LH)
14E, 16
14E, 16
1S8707
LEVER
16
16
5D0322
LEVER
16
16
5D0321
LEVER
16
16
7D9392
LEVER
14E
14E
1S5127
LEVER
120
120
5D8553
LEVER
14E, 16
14E, 16
8D7972
LEVER
12F, 12G, 16
12F, 12G, 16
6D8694
LEVER
16
16
12E, 140