LEVER 5J1665 - Caterpillar

Illustration 24 g03879859
Install plug (22) and plug (21).
Illustration 25 g03879332
Install cover (20) and bolts (19). Tighten bolts (19) to a torque of 7 1 N m (62 9 lb in).
Illustration 26 g03879331
Install the O-ring seals, cover (18) and bolts. Tighten bolts to a torque of 12 2 N m (106 18 lb in).
Illustration 27 g03879330
Install O-ring seals (17).
Illustration 28 g03879350
Install valve (46). Tighten bolts for valve (46) to a torque of 29 3 N m (21 2 lb ft).
Illustration 29 g03879329
Repeat Steps 34 through Steps 48 to install valve (16).
Install valve (16) and bolts (15). Tighten bolts (15) to a torque of 29 3 N m (21 2 lb ft).
Illustration 30 g03879328
Install impeller (14).
Illustration 31 g03879327
Install the O-ring seal, cover (13), and bolts (12).
Illustration 32 g03879325
Install the O-ring seals, solenoid (11), and bolts (10). Tighten bolts (10) to a torque of 7 1 N m (62 9 lb in).
Illustration 33 g03879324
Install O-ring seals (9).
Illustration 34 g03879319
Install housing (8) and bolts (7). Tighten bolts (7) to a torque of 12 2 N m (106 18 lb in).
Illustration 35 g03879314
Install the backup ring, the O-ring seal, sensor (6), and bolts (5).
Repeat Step 57 to install the opposite side sensor.
Illustration 36 g03880832
Install the O-ring seal, idler pump displacement sensor (4), and bolts (3).
Illustration 37 g03880834
Install the O-ring seal, drive pump displacement sensor (2), and bolts (1). End By:
Install the gear pump.
Install the main hydraulic pump.