LEVER 5N3913 - Caterpillar

Removal Procedure
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact the skin.Be sure that the engine and components are cool enough to touch with your bare hand prior to performing any service work.
Raise the hood
Turn the disconnect switch to the OFF position.
Remove the engine panels from the left-hand side of the engine. Note: Put orientation and location marks on all components for installation purposes.
Illustration 1 g03698876
Remove panel (1). Disconnect hose assembly (3). Remove tube assembly (2) and hose (4).
Illustration 2 g03698900
Loosen clamp (5) and remove clamp (12) in order to reposition tube (6) away from the second stage turbocharger.
Remove clamp (7) and clamp (14) in order to remove heat shield and elbow (13).
Disconnect hose (8) and tube (15).
Remove clamp (11) and clamp (9) in order to remove tube assembly (10).
Illustration 3 g02680137
Remove bolts (16) in order to disconnect tube assembly (17). Remove gasket (18) from second stage turbocharger (22).
Remove bolts (20) in order to disconnect tube assembly (21). Remove gasket (19) from second stage turbocharger (22).
Illustration 4 g02680142
Remove nuts (25), second stage turbocharger (22), and bracket (23). If necessary, remove studs (24) from the engine.
Illustration 5 g03699055
Remove nuts (26) and remove bracket (23). If necessary, remove studs (27).