LEVER AS 6Y2655 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01456857
Disconnect hose assembly (1). Remove bolts (6) and tube assembly (5).
Disconnect tube assembly (3) and hose (4).
Attach a suitable lifting device to turbocharger (2). The weight of turbocharger (2) is approximately 23 kg (50 lb). Remove nuts (7). Remove turbocharger (2) and the gasket.