LEVER-RACK CONTROL 7N4555 - Caterpillar

Illustration 39 g03716779
Remove elbow (72). Disconnect hose (73).
Illustration 40 g03716784
Disconnect hoses (74) and hose (76). Disconnect hose assembly (75).
Illustration 41 g03716797
Remove elbow (77).
Disconnect hose assembly (78).
Illustration 42 g03716807
Disconnect hose assemblies (79).
Illustration 43 g03716821
Disconnect hose (80).
Illustration 44 g03717056
Illustration 45 g03717195
Attach Tooling (B) to transmission (81). Attach Tooling (B) to Tooling (C) and a suitable lifting device. Attach a suitable lifting device to the lifting points on engine (82) and to Tooling (C). The combined weight of engine (82), transmission (81), the torque converter, and the output transfer gears is approximately 3334 kg (7350 lb).
Illustration 46 g03717253
Do not lower the bottom guard while under the machine. Injury could occur if the bottom guard slips off of the jack while it is being lowered.
Position Tooling (D) under guard (83). The weight of guard (83) is approximately 67 kg (148 lb).
Remove bolts (84) and the washers. Use Tooling (D) in order to remove guard (83).
Illustration 47 g03717256
Remove bolts (85) and the washers.
Illustration 48 g03717232
Remove bolts (86) and the washers.
Illustration 49 g03717276
Left side of the machine.
Remove nut (87), the washers, and the bolt. Repeat this step for the opposite side of the machine.
Illustration 50 g03717282
Raise the engine, the transmission, the torque converter, and the output transfer gears until support assembly (89) is visible, as shown in Illustration 50. Attach a suitable lifting device to support assembly (89). The weight of support assembly (89) is approximately 55 kg (121 lb). Remove bolts (88) and the washers, and the spacers. Use the suitable lifting device in order to remove support assembly (89). Repeat this step for the opposite side of the machine.
Illustration 51 g03717056
Illustration 52 g03717195
Use Tooling (B), Tooling (C), and the suitable lifting device in order to remove engine (82), transmission (81), the torque converter, and the output transfer gears.