LEVER ASSEM. 8J6131 - Caterpillar

8J6131 LEVER ASSEM. Caterpillar parts 983

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8J6131
8J-6131
8J6131

Buy LEVER ASSEM. 8J6131 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER,

Compatible equipment models: 8J6131:

TRACK LOADER 983 Caterpillar

Number on catalog scheme: 18

Caterpillar 8J6131 Parts scheme LEVER ASSEM.

For full view, you need register

Information:

Module.
Repeat the Test Step.If the replacement for the main EMS Display Module resolves the problem, reconnect the suspect EMS Display Module and verify the return of the problem.If the problem returns, replace the suspect EMS Display Module.Verify that the problem is eliminated. Stop.Test Step 13. Check the Resistance Through the EMS Harness
Turn the keyswitch to the OFF position.
Disconnect the following components from the EMS harness.
Main EMS Display Module
Tachometer
Quad Gauge
Set an ohmmeter on the 200 Ohm scale and measure the resistance between the following pins.
Pin 34 (40 Pin EMS Connector) and Pin 1 (6 Pin Tachometer connector)
Pin 2 (40 Pin EMS Connector) and Pin 2 (6 Pin Tachometer connector)Note: Wiggle the harness during the measurement in order to reveal an intermittent open condition.Expected Result:The resistance is less than 10 Ohms through the harness for each measurement.Results:
YES - The resistance is less than 10 Ohms. Proceed to Test Step 14.
NO - The resistance is greater than 10 Ohms. There is an open circuit in the harness.Repair: Make the necessary repairs.Verify that the repair eliminates the problem. Stop.Test Step 14. Check for