LEVER-CLUTCH CONTROL 8M9577 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     4C-5597     Anti-Seize Compound     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01293092
Install elbow (12) onto precooler (13) .
Apply Tooling (A) to the threads of clamp (14). Connect clamp (14). Tighten clamp (14) to a torque of 12 4 N m (106 35 lb in).
Illustration 2 g01293077
Install precooler (12) .
Apply Tooling (A) to the threads of clamp (10). Connect clamp (10). Tighten clamp (10) to a torque of 12 4 N m (106 35 lb in).
Install bolts (11) .
Illustration 3 g01293075
Connect hose (9) .
Illustration 4 g01293068
Connect hose (8). Connect hose (7) .
Illustration 5 g01293051
Illustration 6 g01293066
Install valve (2). Install bolts (5) .
Connect hose (6). Connect tube assemblies (4). Connect tube assembly (3). Connect harness assembly (1) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".