LEVER AS 9R4445 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9200     Lever Puller Hoist     1    
B     138-7573     Link Brackets     3    Fuel Tank (Center)
Illustration 1 g01412666
Illustration 2 g01412672
Attach Tooling (A), Tooling (B), and a suitable lifting device to fuel tank (6). The weight of fuel tank (6) is approximately 272 kg (600 lb). Install fuel tank (6). Install bolts (7) .
Illustration 3 g01412662
Illustration 4 g01412663
Connect hoses (4) and (5) .
Illustration 5 g01412660
Position hose assemblies (3). Connect hose assembly (2). Install clips (1).
Fill the fuel tank. Refer to Operation and Maintenance Manual, "Refill Capacities".Fuel Tanks (Left and Right)
Illustration 6 g02590937
Use Tooling (A), Tooling (B), and a suitable lifting device to install fuel tank (10). The weight of fuel tank (10) is approximately 544 kg (1200 lb).
Illustration 7 g02590857
Illustration 8 g02590936
Install bolts (9) and bolts (8) .
Illustration 9 g02590777
Install brackets (7). Install harness assembly (6) and the connecting hardware. Install support (5) .
Illustration 10 g01412642
Connect hose (4). Connect hose assemblies (3) .
Illustration 11 g01412637
Install plates (1) .
Fill the fuel tank. Refer to Operation and Maintenance Manual, "Refill Capacities".
Repeat Steps 1 to 5 for the opposite fuel tank.End By: Install the bumper. Refer to Disassembly and Assembly, "Bumper - Install".