LEVER ASSEMBLY B137654 - Caterpillar

Illustration 10 g00893660
Install panel (30) .
Illustration 11 g00893656
Install cover (28) .
Install dipstick tube (29) .
Illustration 12 g00893651
Install cover (27) .
Illustration 13 g00893644
Install bolts (25) in engine mount (26) .
Illustration 14 g00893642
Install clip (22) .
Position A/C compressor (24). Install bolts (23).
Illustration 15 g00893638
Position cable assembly (21). Tighten nut (19). Install nut (20).
Illustration 16 g00893629
Connect wire (15) and wire (18). Install cable strap (17) .
Connect heater hose (16) .
Illustration 17 g00893619
Connect harness assembly (13).
Install clip (14) .
Illustration 18 g00893561
Connect wires (11) on the starter. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Install clips (12) .
Illustration 19 g00893543
Install panel (10) .Note: Panel (10) is located underneath the main hydraulic pump.
Illustration 20 g00893536
Install fuel hoses (8) and clip (9) .
Illustration 21 g00893532
Position filter base (5) .
Install bolts (7).
Install hose assemblies (6) .
Illustration 22 g00893530
Install hose assemblies (4) .
Illustration 23 g00893526
Install panel (2) and (3) .
Illustration 24 g00893524
Install panel (1) .
Refill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Open the fuel shutoff valve on the fuel tank. Refer to Operation and Maintenance Manual, "Fuel Tank Shutoff and Drain Control".End By:
Install the radiator. Refer to Disassembly and Assembly, "Radiator - Install".
Install the belt for the A/C compressor. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".