LID ASSEM. 8D0268 - Caterpillar

Removal Procedure
Start By:
Remove the front bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove" for the correct procedure.Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 1 g02779879
Reposition baffle (1) out of the way
Illustration 2 g02779880
Remove hose (2) .
Illustration 3 g02779881
Disconnect harness assembly (3). Remove light assembly (4) .
Illustration 4 g02779882
Disconnect tube assembly (5) .
Illustration 5 g02779884
Remove brackets (6) .
Illustration 6 g02779885
Attach a suitable lifting device to aftercooler (7) .
Illustration 7 g02779886
Remove bolts (8). Remove aftercooler (7). The weight of aftercooler (7) is approximately 32 kg (71 lb).