LIFT GP 0988186 - Caterpillar

Accumulated grease and oil on a work tool is a fire hazard.Remove debris with steam cleaning or high pressure water at any time a significant quantity of oil is spilled on the work tool.
Note: Watch closely for leaks. Use a board or a piece of cardboard when you check for a leak. If a leak is observed, find the source of the leak and correct the leak. If a leak is suspected or a leak is observed, check the fluid levels for the auger and for the host machine more frequently.
Illustration 1 g00649871
Inspect the pilot tooth (1) for damage or for excessive wear. Replace the pilot tooth, if necessary.
Inspect the auger bit teeth (5) for damage or for excessive wear. Replace any damaged teeth or any worn teeth.
Inspect the auger housing (7) for leaks from the auger motor. Correct any leaks.
Inspect the hydraulic system (3) for leaks. Repair any hydraulic system leaks. Inspect the hoses, the seals, and the flanges.
Make sure that the planetary (6) is secured to the auger housing. Tighten any loose bolts. Replace missing bolts.
Inspect the mounting bolt (2) for the auger bit for damage or for wear. Replace the bolt, if necessary.
Inspect the mounting bracket (4) for damage or for wear. Refer to Operation and Maintenance Manual, "Frame Mounting Bracket - Inspect".