4Y7607 LIFT CYLINDER GROUP Caterpillar parts
D7H
Rating:
Alternative (cross code) number:
CA4Y7607
4Y-7607
4Y7607
CA4Y7607
4Y-7607
4Y7607
Weight: 240 pounds 108 kg.
Information:
BORE DIAMETER
101.6
mm
CLOSED LENGTH
905
mm
PIN SIZE CAP END
63.5
mm
PIN SIZE ROD EYE
88.9
mm
ROD DIAMETER
63.5
mm
STROKE
1385
TYPE
THD CROWN
TRACK-TYPE TRACTOR,
Compatible equipment models: 4Y7607:
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar SIS
D7H & D7H LGP SERIES II TRACTORS / POWERSHIFT / 4AB05500-UP (MACHINE) POWERED BY 3306 ENGINE »
4Y-7607
LIFT CYLINDER GROUP
D7H & D7H LGP SERIES II TRACTORS / POWERSHIFT / 4AB05500-UP (MACHINE) POWERED BY 3306 ENGINE »
4Y-7607
LIFT CYLINDER GROUP
D7H & D7H LGP SERIES II TRACTOR / POWERSHIFT / 2RG05500-UP (MACHINE) POWERED BY 3306 ENGINE »
4Y-7607
LIFT CYLINDER GROUP
Caterpillar parts catalog:
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3H-0468 Puller Plate 4
9S-9155 Spacer 1
8B-7550 Push-Puller Leg 2
5F-7344 Block Puller 1
8H-0663 Bearing Puller 1
5F-7345 Screw 1
B 1P-1858 Retaining Ring Pliers 1 Start By:
Remove the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive - Remove".
Illustration 1 g01062840
Remove bolts (1) .
Remove gear and shaft (2) with bearings (3) from accessory drive housing (5) .Note: One end of the gear shaft is longer than the opposite end. Prior to assembly, ensure that the gear shaft is in the correct position.
Use Tooling (A) in order to remove bearings (3) from gear and shaft (2) .
Use Tooling (B) in order to remove retaining ring (4) from accessory drive housing (5) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3H-0468 Puller Plate 4
9S-9155 Spacer 1
8B-7550 Push-Puller Leg 2
5F-7344 Block Puller 1
8H-0663 Bearing Puller 1
5F-7345 Screw 1
B 1P-1858 Retaining Ring Pliers 1 Start By:
Remove the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive - Remove".
Illustration 1 g01062840
Remove bolts (1) .
Remove gear and shaft (2) with bearings (3) from accessory drive housing (5) .Note: One end of the gear shaft is longer than the opposite end. Prior to assembly, ensure that the gear shaft is in the correct position.
Use Tooling (A) in order to remove bearings (3) from gear and shaft (2) .
Use Tooling (B) in order to remove retaining ring (4) from accessory drive housing (5) .
Parts lift Caterpillar catalog:
1312892
LIFT CYLINDER AND LINES
D7H, D7R, D7R II
D7H, D7R, D7R II
1312894
LIFT CYLINDER AND LINES
D7H, D7R, D7R II
D7H, D7R, D7R II
1314632
LIFT CYLINDER GROUP
D7H, D7R, D7R II
D7H, D7R, D7R II
1314643
LIFT CYLINDER GROUP
D6R, D7H, D7R, D7R II
D6R, D7H, D7R, D7R II
1312891
LIFT CYLINDER AND LINES
D7H, D7R, D7R II
D7H, D7R, D7R II
1312893
LIFT CYLINDER AND LINES
D7H, D7R, D7R II
D7H, D7R, D7R II
1312893
LIFT CYLINDER AND LINES
D7H, D7R, D7R II
D7H, D7R, D7R II
1312891
LIFT CYLINDER AND LINES
D7H, D7R, D7R II
D7H, D7R, D7R II
5A9839
LIFT CYLINDER SUPPORT
920, 930
920, 930
1756352
LIFT ARM ASSEMBLY
980G II, 980H
980G II, 980H
1127923
LIFT ARM ASSEMBLY
966F, 966F II
966F, 966F II