4223886 LIFTER AS-VALVE Caterpillar parts
3306, 3306C, R1300G
Rating:
Alternative (cross code) number:
CA4223886
422-3886
4223886
CA4223886
422-3886
4223886
Weight: 0.64 pounds 0 kg.
INDUSTRIAL ENGINE, TRUCK ENGINE,
This part in 2 request:
Show.
This information for suppliers only!
2024-08-19
2018-08-07
Compatible equipment models: 4223886:
Number on catalog scheme:
3
For full view, you need register
Information:
Use only clean water to flush the cooling system when Extended Life Coolant (ELC) is drained and replaced.Drain the Cooling System
Stop the engine and allow the engine to cool. Ensure that the engine will not start when the cooling system is drained.
Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Illustration 1 g01162705
Locations of the drain plugs
(1) Oil cooler
(2) Jacket water pump
(3) SCAC water pump
Open the cooling system drain valves (if equipped). If the cooling system is not equipped with drain valves, remove drain plugs (1), (2), and (3). Allow the coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Caterpillar Dealer Service Tools Group:Outside Illinois 1-800-542-TOOL
Inside Illinois 1-800-541-TOOL
Canada 1-800-523-TOOL
Clean the Cooling System
After the cooling system has been drained, flush the cooling system with clean water in order to remove any debris.
Close the cooling system drain valves (if equipped). Clean the drain plugs and install the drain plugs.
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with clean water. Install the cooling system filler cap. Operate the engine until the temperature reaches 49 °C (120 °F) to 66 °C (150 °F).
Stop the engine and allow the engine to cool. Ensure that the engine will not start when the cooling system is drained. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Open the cooling system drain valves (if equipped). If the cooling system is not equipped with drain valves, remove the drain plugs. See Illustration 1. Allow the coolant to drain. Flush the cooling system with clean water. Close the cooling system drain valves (if equipped). Install the drain plugs.
Repeat Steps 3, 4, and 5. Fill the Cooling System
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with Extended Life Coolant (ELC). See the Operation and Maintenance Manual, "Refill Capacities and Recommendations" for the correct cooling system capacity. Do not install the cooling system filler cap.
Start the engine. Operate the engine in order to purge the air from the cavities of the engine block. Allow the ELC to warm and allow the coolant level to stabilize. Stop the engine.
Check the coolant level. Maintain the coolant to the proper level on the sight gauge (if equipped). If a sight gauge is not equipped, maintain the coolant within 13 mm (0.5 inch) below the bottom of the filler pipe.
Clean the cooling system filler cap. Inspect the gaskets of the cooling system filler cap. If the gaskets of the cooling system filler cap are damaged, discard the old cooling system filler cap
Stop the engine and allow the engine to cool. Ensure that the engine will not start when the cooling system is drained.
Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Illustration 1 g01162705
Locations of the drain plugs
(1) Oil cooler
(2) Jacket water pump
(3) SCAC water pump
Open the cooling system drain valves (if equipped). If the cooling system is not equipped with drain valves, remove drain plugs (1), (2), and (3). Allow the coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Caterpillar Dealer Service Tools Group:Outside Illinois 1-800-542-TOOL
Inside Illinois 1-800-541-TOOL
Canada 1-800-523-TOOL
Clean the Cooling System
After the cooling system has been drained, flush the cooling system with clean water in order to remove any debris.
Close the cooling system drain valves (if equipped). Clean the drain plugs and install the drain plugs.
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with clean water. Install the cooling system filler cap. Operate the engine until the temperature reaches 49 °C (120 °F) to 66 °C (150 °F).
Stop the engine and allow the engine to cool. Ensure that the engine will not start when the cooling system is drained. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Open the cooling system drain valves (if equipped). If the cooling system is not equipped with drain valves, remove the drain plugs. See Illustration 1. Allow the coolant to drain. Flush the cooling system with clean water. Close the cooling system drain valves (if equipped). Install the drain plugs.
Repeat Steps 3, 4, and 5. Fill the Cooling System
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with Extended Life Coolant (ELC). See the Operation and Maintenance Manual, "Refill Capacities and Recommendations" for the correct cooling system capacity. Do not install the cooling system filler cap.
Start the engine. Operate the engine in order to purge the air from the cavities of the engine block. Allow the ELC to warm and allow the coolant level to stabilize. Stop the engine.
Check the coolant level. Maintain the coolant to the proper level on the sight gauge (if equipped). If a sight gauge is not equipped, maintain the coolant within 13 mm (0.5 inch) below the bottom of the filler pipe.
Clean the cooling system filler cap. Inspect the gaskets of the cooling system filler cap. If the gaskets of the cooling system filler cap are damaged, discard the old cooling system filler cap
Caterpillar parts catalog:
Parts lifter Caterpillar catalog:
120, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14E, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 225, 235, 235B, 330, 330 L, 3304, 3304B, 3306, 3306...
120G, 12G, 130G, 140G, 14G, 160G, 215, 225, 235, 235B, 3204, 330 L, 3304, 3304B, 3306, 3306B, 518C, 528, 572G, 615C, 627E, 637E, 815B, 926, 930R, 950B, 953, 963, D250B, D25C, D300B, D30C, D350C, D35C,...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 3204, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 3...
2W7043
LIFTER AS-VALVE
3306, 3306C
3306, 3306C
3306, 3306C, R1300
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 924F,...
2839354
LIFTER GP-VALVE
793F, 797F, C175-16
793F, 797F, C175-16
2839353
LIFTER GP-VALVE
793F, 797F, C175-16
793F, 797F, C175-16
1159386
LIFTER GP-VALVE
3176C, 3196, 345B, 345B L, 480, 65E, 75D, 75E, 85D, 85E, 95E, C-10, C-12
3176C, 3196, 345B, 345B L, 480, 65E, 75D, 75E, 85D, 85E, 95E, C-10, C-12
1118924
LIFTER GP-VALVE
G3412, G3412C
G3412, G3412C
3574825
LIFTER GP-VALVE
793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F, C175-16, C175-20
793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F, C175-16, C175-20
3176, 3176B, 3176C, 3196, 345B, 345B L, 480, 65E, 75, 75C, 75D, 75E, 85D, 85E, 95E, C-10, C-12
6I1610
LIFTER AS-UNIT INJECTOR
3176B, 75C, 85C, R1700 II
3176B, 75C, 85C, R1700 II
2064245
LIFTER AS-VALVE
3176B, 480, 75C, 85C, D7R II, R1700 II
3176B, 480, 75C, 85C, D7R II, R1700 II
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 3204, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 3...
120G, 12G, 130G, 140G, 14G, 160G, 215, 225, 235, 235B, 3204, 330 L, 3304, 3304B, 3306, 3306B, 518C, 528, 572G, 615C, 627E, 637E, 815B, 926, 930R, 950B, 953, 963, D250B, D25C, D300B, D30C, D350C, D35C,...
120, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14E, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 225, 235, 235B, 330, 330 L, 3304, 3304B, 3306, 3306...