LIFTER ASSEM. 5L5486 - Caterpillar

Illustration 1 g03327330
Illustration 2 g03327346
View of area A
Table 1
Specification for 394-3836 Engine Oil Lines Gp
Item Qty Part Specification Description
1 6 109-2332 O-Ring Seal Lightly, lubricate the bore with the fluid that is being sealed.
2 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
3 2 7N-7697 Plunger Valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Valves must be fully open at 200 30 kPa (29 4 psi).
4 2 6B-9202 Spring Length under test force is 68.3 mm (2.9 inch).
Test force is 84.5 99.6 N (19.0 22.4 lb).
Free length after test is 112.7 mm (4.44 inch).
5 2 0S-1594 Bolt Use the following tightening sequence in order to tighten the clamp bolts:
1. Snug the clamp assembly to the tube assembly.
2. Tighten the clamp assembly to the elbow with mating group.
3. Then, tighten the clamp assembly to the tube assembly.
6 2 0S-1571 Bolt
7 1 2W-1969 Bypass Valve Valve must open with a pressure difference of 180 20 kPa (26 3 psi).
8 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).