LIGHTING GP-FLOOD 1143107 - Caterpillar

One to Six Months
If the engine or machine is to be placed in storage for one to 6 months, the following steps be followed should be taken:
Protect the air cleaner inlet from water entry
Protect the exhaust outlet or muffler outlet from water entry
Check the coolant protection and top off the radiator
Store indoors if possibleFor Extended Periods
Follow the above recommended procedures, plus do the following:
Drain the engine crankcase and refill with recommended oil
Change the oil filter
Disconnect and remove the battery
Clean the exterior surface of the engine
If the engine is equipped with an automotive type clutch or PTO clutch, make sure that the clutch is disengagedRemoving the Engine From Extended Storage
When removing the engine from extended storage:
Install a fully charged battery
Remove all protective coverings form the air inlet, air cleaner, exhaust, and muffler openings
Check the coolant level in the radiator and verify the protection level of the coolant
Check the engine oil level
Start the engine and allow it to run at slow idle. Verify engine oil pressure
Run the engine at various speeds for approximately 15 minutes
Shut down the engine, drain the oil, change the oil filter, and refill it with the recommended grade of oil.