LIGHTING SYS G 1M0474 - Caterpillar

Note: Put identification marks on all hose assemblies and on all harness assemblies for installation purposes. Plug hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the fuel tank into a suitable container for storage or disposal.
Illustration 1 g01175700
Disconnect hose assemblies (1) .
Remove cable straps (2) .
Disconnect harness assembly (3) .
Illustration 2 g01175711
Disconnect struts (4) .
Illustration 3 g01175715
Remove bolts (5) .
Use two people in order to remove panel (6). The weight of panel (6) is approximately 23 kg (50 lb).
Illustration 4 g00995000
Remove bolts (9) .
Remove plate (8) .
Remove the hose and fitting (7) .
Illustration 5 g00994998
Remove bolt (10) from strap (11) .
Illustration 6 g00994999
Remove bolt (12) .
Remove strap (11) .
Illustration 7 g00908379
Disconnect hose assemblies (13) .
Illustration 8 g01009535
Attach a suitable lifting device to bracket (14). The weight of bracket (14) is approximately 39 kg (85 lb).
Illustration 9 g01173560
Remove bolts (15) and reposition junction box (16) .
Illustration 10 g01173563
Remove bolt (17) .
Illustration 11 g01173566
Remove bolts (18) from bracket (14) .
Illustration 12 g01173567
Disconnect harness assembly (19) .
Remove bolts (20) .
Remove bracket (14) .
Illustration 13 g01173569
Remove bolts (21) and bracket (22) .
Illustration 14 g01173570
Attach a suitable lifting device to fuel tank (23). Remove fuel tank (23). The weight of fuel tank (23) is approximately 32 kg (70 lb).