LIGHTING GP 3157120 - Caterpillar

Illustration 1 g02488316
Table 1
Specification for 345-8116 Hopper    
Item     Qty     Part     Specification Description    
1     2     166-8785 Pin As     Apply 4C-5599 Anti-Seize Compound to the full length diameter of the pin assemblies.    
2     4     8T-4167 Hard Washer     As required, use the following hard washers in order to maintain a maximum gap of
6.0 mm (0.24 inch) between the front wing and the hoppers.
Thickness is
4.0 mm (0.16 inch).    
3     2     185-4025 Shim     As required, use the following shim in order to maintain a maximum gap of
6.0 mm (0.24 inch) between the front wing and the hoppers.
Thickness is
1.52 mm (0.06 inch).    
4     8     270-3646 Plate     As required, use the following plate in order to prevent hopper cylinders from bottoming out and maintain vertical sides.
Thickness is
3.0 mm (0.12 inch).    
5     2     8T-2393 Bolt     Torque to
75 5 N m (55 4 lb ft).