LIGHTING SYSTEM 8S5586 - Caterpillar

(1) Torque for 22 bolts ... 300 40 N m (220 30 lb ft)(2) Torque for plug ... 75 7 N m (55 5 lb ft)(3) Torque for plug ... 45 6 N m (33 4 lb ft)(4) Rubber toric seals and all surfaces in contact with them must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. Seal must be assembled square with the bore and toric seal must not be bulged or twisted.(5) Torque for gage ... 45 6 N m (33 4 lb ft)(6) See Axle Housing Assembly And Axle Bearing Preload Adjustment(7) Torque for four bolts ... 570 80 N m (420 60 lb ft) (8) Torque for six bolts ... 300 40 N m (220 30 lb ft)(9) Torque for two bleeder screws ... 11 4 N m (8 3 lb ft)(10) Torque for eight bolts ... 570 80 N m (420 60 lb ft)(11) Torque for 12 bolts ... 300 40 N m (220 30 lb ft)(12) Torque for 10 bolts ... 300 40 N m (220 30 lb ft) (13) Torque for pressure relief fitting ... 13 4 N m (10 3 lb ft)