LINE AS-FUEL INJECTION 1W6317 - Caterpillar

Illustration 1 g06004822
Select the Calibrations menu.
Illustration 2 g06004847
Select the Payload menu.
Illustration 3 g06127941
Select the Simple Calibrations menu.Note: The most recent 15 trucks stored are saved in the list, with the newest trucks at the bottom of the list.The truck ID in the simple calibration list will match the Truck ID of the truck when stored.To continue the simple calibration update, perform the following actions:
Select the truck requiring adjustment.
Press the "OK" button.
Input the weight for that truck that was reported by the scale
Press the "OK" button to accept the weight.
Repeat Step 1 through Step 4 for up to 15 trucks.Note: Enter truck adjustment weights for all trucks for which site scale data is available. Even if the value in the Simple Calibration menu is the same as the scale weight.The last truck whose weight was entered will be removed from the Simple Calibration list.Note: When identifiers for the truck are not used, verify the proper truck for each weight. Remember that the trucks are listed in the order of loading. Accuracy could be adversely affected if the verification of the truck is not performed. After the trucks are entered, scale system will adjust the accuracy for future truck loads. The average truck weight should be closer to the scale value after this procedure is performed.