2S4504 LINE ASSEM. (No. 4) Caterpillar parts
777, 992, D348
Rating:
Alternative (cross code) number:
CA2S4504
2S-4504
2S4504
CA2S4504
2S-4504
2S4504
Weight: 4 pounds 1 kg.
INDUSTRIAL ENGINE, WHEEL LOADER,
Compatible equipment models: 2S4504:
Number on catalog scheme:
12
For full view, you need register
Information:
Implement ECM Event Code List
The following table lists the event codes that apply to the control system of the implement. The recommended response is listed. Use the Cat ET service tool to determine the event codes that are active or logged.
Table 3
Implement System Event Identifier (EID) Codes
EID Level Description Recommended Response/Possible Cause
454 2 Hydraulic Case Drain Filter Plugged Probable Cause: Filter is clogged.
Recommended Actions: Replace filter.
878 2 High Hydraulic Oil Temperature Probable Cause: When hydraulic oil temperature is greater than 93° C (210° F) for more than 3 seconds. Deactivates when hydraulic oil temperature is less than 90° C (207° F) for greater than 1 second.
Recommended Actions: (1) Modify machine operation to reduce system load. (2) Check the hydraulic oil level. (3) Check hydraulic cooling system. Clean the hydraulic oil cooler, if needed.
878 3 High Hydraulic Oil Temperature Immediate Safe Machine Shutdown Required.
Probable Cause: When hydraulic oil temperature is greater than 96° C (210° F) for more than 3 seconds. Deactivates when hydraulic oil temperature is less than 90° C (207° F) for greater than 1 second.
Recommended Actions: (1) Modify machine operation to reduce system load. (2) Check the hydraulic oil level. (3) Check hydraulic cooling system. Clean the hydraulic oil cooler, if needed. (4) Ensure that air is not in the oil and the viscosity of the oil is correct. (5) Check for a restriction in oil flow due to a bent hose, a bent tube, or a restriction in an oil passage. (6) Check hydraulic pump for excessive wear.
2086 2 Hydraulic Fan Return Filter Plugged Probable Cause: Filter is clogged.
Recommended Actions: Replace filter.
2134 3 Low Primary Steering Pressure Immediate Safe Machine Shutdown Required.
Probable Cause: Primary steering pressure is low.
Recommended Actions: Check hydraulic fluid in tank. Check steering supply hoses for signs of leakage. Check system for locations that would result in crimped hoses.
The following table lists the event codes that apply to the control system of the implement. The recommended response is listed. Use the Cat ET service tool to determine the event codes that are active or logged.
Table 3
Implement System Event Identifier (EID) Codes
EID Level Description Recommended Response/Possible Cause
454 2 Hydraulic Case Drain Filter Plugged Probable Cause: Filter is clogged.
Recommended Actions: Replace filter.
878 2 High Hydraulic Oil Temperature Probable Cause: When hydraulic oil temperature is greater than 93° C (210° F) for more than 3 seconds. Deactivates when hydraulic oil temperature is less than 90° C (207° F) for greater than 1 second.
Recommended Actions: (1) Modify machine operation to reduce system load. (2) Check the hydraulic oil level. (3) Check hydraulic cooling system. Clean the hydraulic oil cooler, if needed.
878 3 High Hydraulic Oil Temperature Immediate Safe Machine Shutdown Required.
Probable Cause: When hydraulic oil temperature is greater than 96° C (210° F) for more than 3 seconds. Deactivates when hydraulic oil temperature is less than 90° C (207° F) for greater than 1 second.
Recommended Actions: (1) Modify machine operation to reduce system load. (2) Check the hydraulic oil level. (3) Check hydraulic cooling system. Clean the hydraulic oil cooler, if needed. (4) Ensure that air is not in the oil and the viscosity of the oil is correct. (5) Check for a restriction in oil flow due to a bent hose, a bent tube, or a restriction in an oil passage. (6) Check hydraulic pump for excessive wear.
2086 2 Hydraulic Fan Return Filter Plugged Probable Cause: Filter is clogged.
Recommended Actions: Replace filter.
2134 3 Low Primary Steering Pressure Immediate Safe Machine Shutdown Required.
Probable Cause: Primary steering pressure is low.
Recommended Actions: Check hydraulic fluid in tank. Check steering supply hoses for signs of leakage. Check system for locations that would result in crimped hoses.
Caterpillar parts catalog:
Parts line Caterpillar catalog:
641B, 650B, 772, 773, 777, 992, D10, D346, D348
641B, 650B, 772, 773, 777, 992, D10, D346, D348
641B, 650B, 772, 773, 777, 992, D10, D346, D348
641B, 650B, 772, 773, 777, 992, D10, D346, D348
641B, 650B, 772, 773, 777, 992, D10, D346, D348
641B, 650B, 772, 773, 777, 992, D10, D346, D348
641B, 650B, 772, 773, 777, 992, D10, D346, D348
641B, 772, 773, 777, 992, D10, D346, D348
777, D10, D348
777, 992, D10, D348
777, 992, D10, D348
5N9354
LINE AS-FUEL INJ
777, D10
777, D10
2S4502
LINE ASSEM. (No. 2)
777, 992, D348
777, 992, D348
16, 1693, 631C, 769, 824B, 834, 988, D343
16, 1693, 631C, 769, 824B, 834, 988, D343
16, 1693, 631C, 769, 824B, 834, 988, D343
16, 1693, 631C, 769, 824B, 834, 988, D343
2S4501
LINE ASSEM. (No. 1)
777, 992, D348
777, 992, D348
2S4503
LINE ASSEM. (No. 3)
777, 992, D348
777, 992, D348