LINE AS-FUEL 3156647 - Caterpillar

3156647 LINE AS-FUEL Caterpillar parts C15, TH35-C15T

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3156647
315-6647
3156647

Weight: 0.20 pounds 0 kg.

Buy LINE AS-FUEL 3156647 Caterpillar genuine, new aftermarket tractor parts with delivery
PETROLEUM PACKAGE, TRUCK ENGINE,

Compatible equipment models: 3156647:

PETROLEUM PACKAGE TH35-C15T

TRUCK ENGINE C15 Caterpillar

Number on catalog scheme: 10

Caterpillar 3156647 Parts scheme LINE AS-FUEL

For full view, you need register

Information:

Illustration 8 g00923936
Remove the shim for the bearing preload (27) from shaft (24) .
Illustration 9 g00923937
Remove rotating group (28) from housing (3). Carefully retain the rotating assembly (28) in housing (3). Turn the rotating assembly upside-down. Slowly lift housing (3) off rotating group (28) .
Illustration 10 g00923939
Illustration 11 g00923940
Note: Mark the location of pistons for assembly purposes.
Remove plate (29) and pistons (30) from barrel (31). Remove retaining ball (32) .
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Illustration 12 g00923941
Illustration 13 g00923943
Use Tooling (A) and a press in order to compress spring (34) until the snap ring (33) can be removed from barrel (31) with Tooling (B). Slowly release the pressure on the press because of the spring pressure. Remove barrel (31) from the press. Remove spring (34), retaining disc (35), and pressure pins (36) .
Illustration 14 g00923944
Remove plug (37) and the O-ring seal.
Illustration 15 g00923990
Remove piston (38) from housing (3) .
Illustration 16 g00923991
Note: The rod is engaged in the socket by the edges of the socket. Extreme care must be used in order to disengage the rod from the socket. Remove the actuator rod out of the smooth shaped socket.
Angle the swashplate (39) so rod (40) extends out of the bore. Remove rod (40) from the socket in swashplate (39) .
Illustration 17 g00923992
Remove swashplate (39) from housing (3). Check the condition of socket (41) .
Illustration 18 g00923994
Remove two bearings (42) .
Remove spring (43) .
Illustration 19 g00923995
Lift shaft (24) out of the housing (3). If necessary, press bearing (44) off shaft (24).
Illustration 20 g00923996
Use Tooling (C) in order to remove snap ring (45) from housing (3) .
Illustration 21 g00923998
Remove seal (46) from housing (3) .