LINE-FUEL INJECTION 3728813 - Caterpillar

Illustration 1 g06046739
Front view
Table 1
Specification for 426-2094 Stick
Item Qty Part Specification Description
- All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins including heel and cylinder pin bores.
1 2 240-2917 Bushing Bore before assembly is 90.250 0.040 mm (3.5531 0.0015 inch).
Installation depth is 9.50 0.80 mm (0.374 0.031 inch).
2 2 128-9884 Bushing Bore before assembly is 80.250 0.020 mm (3.1594 0.0008 inch).
Installation depth is 7.5 0.8 mm (0.29 0.03 inch).
3 1 137-2848 Pin As Diameter is 79.850 0.025 mm (3.1436 0.0001 inch).
4 1 093-0363 Spacer Thickness is 12.0 mm (0.47 inch).
5 As required, use the following shims to adjust a maximum lateral clearance of 1.0 mm (0.04 inch)
1 133-2424 Shim Thickness is 0.5 mm (0.02 inch).
1 133-2425 Shim Thickness is 0.5 mm (0.02 inch).
2 093-0083 Shim Thickness is 1.0 mm (0.04 inch).
2 093-0086 Shim Thickness is 1.0 mm (0.04 inch).
1 7Y-2496 Shim Thickness is 1.6 mm (0.06 inch).
1 7Y-2498 Shim Thickness is 1.6 mm (0.06 inch).
1 093-0115 Shim Thickness is 2.0 mm (0.08 inch).
1 093-0118 Shim Thickness is 2.0 mm (0.08 inch).
6 1 134-9037 Pin As Diameter is 69.850 0.025 mm (2.7500 0.0001 inch).
7 2 096-0854 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
8 2 7X-4803 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.