3833466 LINE AS-FUEL Caterpillar parts
120M 2, 2570C, 2670C, 525D, 535D, 545D, 555D, 563C, 573C, 924K, 930K, 938K, 950K, 962K, C6.6, C7.1, D6K2 LGP, D6N LGP, D6N OEM
Rating:
Alternative (cross code) number:
CA3833466
383-3466
3833466
CA3833466
383-3466
3833466
Weight: 0.16 pounds 0 kg.
GENERATOR SET, WHEEL SKIDDER,
Compatible equipment models: 3833466:
Information:
Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect"
Personal injury can result from driveline torque windup under load.Unequal wheel speed can result in driveline torque windup which can cause driveline components to be under load during disassembly.Relieve the driveline torque windup before disassembly.
Park the machine on a flat, level surface. Place wheel blocks in front of the wheels and behind the wheels.
Release the parking brake.
Release the driveline torque windup by raising either side of the machine until the wheels are off the ground. Lower the wheels back to the ground.
Engage the parking brake.
Illustration 1 g01072359
Remove two bolts (1) and guard (2). Remove four bolts (3) and guard (4) .
Illustration 2 g01072361
Attach a suitable lifting device to rear drive shaft (6). The weight of rear drive shaft (6) is approximately 70 kg (155 lb).
Remove eight bolts (5). Remove rear drive shaft (6) .Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     -     Loctite 7649     -    
B     -     Loctite 263     -    
Illustration 3 g01072361
Attach a suitable lifting device to rear drive shaft (6). The weight of rear drive shaft (6) is approximately 70 kg (155 lb). Install rear drive shaft (6) .
Apply Tooling (A) and Tooling (B) to the threads of bolts (5) prior to assembly. Install bolts (5) .
Tighten bolts to specified torque by using an X pattern to ensure that all components fit correctly and that no gaps are present. Tighten bolts a second time to specified torque by using the same X pattern to ensure that the correct torque has been reached.
Tighten bolts (5) to a torque of 150 15 N m (110 11 lb ft).
Illustration 4 g01072359
Install guard (4) and four bolts (3). Install guard (2) and two bolts (1) .
Lubricate the rear drive shaft. Refer to Operation and Maintenance Manual, "Drive Shafts Universal Joints, Splines, and Bearings - Inspect and Lubricate".End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect"
Personal injury can result from driveline torque windup under load.Unequal wheel speed can result in driveline torque windup which can cause driveline components to be under load during disassembly.Relieve the driveline torque windup before disassembly.
Park the machine on a flat, level surface. Place wheel blocks in front of the wheels and behind the wheels.
Release the parking brake.
Release the driveline torque windup by raising either side of the machine until the wheels are off the ground. Lower the wheels back to the ground.
Engage the parking brake.
Illustration 1 g01072359
Remove two bolts (1) and guard (2). Remove four bolts (3) and guard (4) .
Illustration 2 g01072361
Attach a suitable lifting device to rear drive shaft (6). The weight of rear drive shaft (6) is approximately 70 kg (155 lb).
Remove eight bolts (5). Remove rear drive shaft (6) .Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     -     Loctite 7649     -    
B     -     Loctite 263     -    
Illustration 3 g01072361
Attach a suitable lifting device to rear drive shaft (6). The weight of rear drive shaft (6) is approximately 70 kg (155 lb). Install rear drive shaft (6) .
Apply Tooling (A) and Tooling (B) to the threads of bolts (5) prior to assembly. Install bolts (5) .
Tighten bolts to specified torque by using an X pattern to ensure that all components fit correctly and that no gaps are present. Tighten bolts a second time to specified torque by using the same X pattern to ensure that the correct torque has been reached.
Tighten bolts (5) to a torque of 150 15 N m (110 11 lb ft).
Illustration 4 g01072359
Install guard (4) and four bolts (3). Install guard (2) and two bolts (1) .
Lubricate the rear drive shaft. Refer to Operation and Maintenance Manual, "Drive Shafts Universal Joints, Splines, and Bearings - Inspect and Lubricate".End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Cat SIS web machinery list:
Parts line Caterpillar catalog:
3388797
LINE AS-FUEL
120M 2, 2384C, 2484C, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 559C, 563C, 573C, 579C, 924K, 930K, 938K, 95...
120M 2, 2384C, 2484C, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 559C, 563C, 573C, 579C, 924K, 930K, 938K, 95...
3659910
LINE
120M 2, 2570C, 2670C, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 563C, 573C, 950K, 962K, BG1000E, BG1055E, C7.1
120M 2, 2570C, 2670C, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 563C, 573C, 950K, 962K, BG1000E, BG1055E, C7.1
3833474
LINE AS-FUEL
C6.6, C7.1
C6.6, C7.1
3789832
LINE-FUEL
C7.1
C7.1
3896782
LINE AS-FUEL
C7.1
C7.1
3996440
LINE AS-FUEL
C7.1
C7.1
4506643
LINE AS-FUEL
C7.1
C7.1
3940678
LINE AS-FUEL
C7.1
C7.1
3659910
LINE
120M 2, 2570C, 2670C, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 563C, 573C, 950K, 962K, BG1000E, BG1055E, C7.1
120M 2, 2570C, 2670C, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 563C, 573C, 950K, 962K, BG1000E, BG1055E, C7.1
3343801
LINE-FUEL
773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 844K, 854K, 990K, 992K, 993K, C27, C32, D10T2, D11T
773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 844K, 854K, 990K, 992K, 993K, C27, C32, D10T2, D11T
3584272
LINE AS-FUEL
797, 797B, 797F, C175-20
797, 797B, 797F, C175-20
2903916
LINE-FUEL INJECTION
120M, 12M, 613G, 924H, 924HZ, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56B, CS-64, CS-74, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, M322D...
120M, 12M, 613G, 924H, 924HZ, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56B, CS-64, CS-74, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, M322D...
2903915
LINE-FUEL INJECTION
120M, 12M, 613G, 924H, 924HZ, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56B, CS-64, CS-74, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, M322D...
120M, 12M, 613G, 924H, 924HZ, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56B, CS-64, CS-74, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, M322D...
3563534
LINE-DRAIN
C4.4, C4.4XQ80
C4.4, C4.4XQ80
3564040
LINE-DRAIN
C4.4, C4.4XQ80
C4.4, C4.4XQ80
7C3411
LINE AS-FUEL INJECTION
3508B, 3512B, 3512C, 3516B, 3516C
3508B, 3512B, 3512C, 3516B, 3516C
3506659
LINE AS-FUEL INJECTION
C13, C13 XQ350, CX31-C13I
C13, C13 XQ350, CX31-C13I
3833472
LINE AS-FUEL
120M 2, 2570C, 2670C, 525D, 535D, 545D, 555D, 563C, 573C, 924K, 930K, 938K, 950K, 962K, C7.1, D6K2 LGP, D6N LGP, D6N OEM
120M 2, 2570C, 2670C, 525D, 535D, 545D, 555D, 563C, 573C, 924K, 930K, 938K, 950K, 962K, C7.1, D6K2 LGP, D6N LGP, D6N OEM
3579541
LINE AS-FUEL
120M 2, 2570C, 2670C, 525D, 535D, 545D, 555D, 563C, 573C, 924K, 930K, 938K, 950K, 962K, C6.6, C7.1, D6K2 LGP, D6N LGP, D6N OEM
120M 2, 2570C, 2670C, 525D, 535D, 545D, 555D, 563C, 573C, 924K, 930K, 938K, 950K, 962K, C6.6, C7.1, D6K2 LGP, D6N LGP, D6N OEM