LINE AS-FUEL 3833527 - Caterpillar

26May2016
U-268
A-207
D-239
O-234
Parts stock action only
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLE REMOVING CERTAIN 132-6469 WIRING HARNESSES FROM DEALER PARTS STOCK
7750 PI70623
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code.
The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
31Aug2016
PROBLEM
The existing 132-6469 Wiring Harness may have been made with the incorrect braiding material and will not fit into the routing channel in the rocker base. If a harness with the incorrect braiding has been installed the braiding can fail causing the harness to fail.
ACTION REQUIRED
Inspect all 132-6469 Wiring Harnesses in dealer parts stock.
Inspect the braiding of the harness. Refer to Image 1.
If the ends of the braiding are terminated correctly, the harnesses is good. Mark the harness as inspected per this program and return the harness to dealer parts stock.
The braiding has been doubled or folded back at the ends, the harness has the incorrect braiding material. Remove the harness from dealer parts stock.
Image1
SERVICE CLAIM ALLOWANCES
Submit one claim for all parts removed from dealer parts stock.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.