LINE AS-FUEL 3940678 - Caterpillar

Illustration 30 g01090472
Remove thrust bearing (39) and two thrust bearing races (40) from carrier assembly (41) .
Illustration 31 g01090479
Remove carrier assembly (41) and stator (42) as a unit from rotating housing (35) .
Illustration 32 g00870212
Use Tooling (G) in order to remove retaining ring (43) from stator (42). Remove thrust race (44) from stator (42) .
Illustration 33 g00870214
Remove 11 freewheel rollers (45) and 11 freewheel springs (46) from freewheel cam (47). Remove stator (42) from carrier assembly (41) .
Illustration 34 g01090489
Use Tooling (G) in order to remove retaining ring (48) from stator (42). Remove side plate (49) from stator (42) .
Use Tooling (E) and a suitable press in order to remove freewheel cam (47) from stator (42) .Note: If necessary, raise the temperature of the stator to a maximum of 135 °C (275 °F) for approximately fifteen minutes.
Illustration 35 g00870216
Remove thrust bearing (50) from carrier assembly (41). Remove sleeve bearing (51) from carrier assembly (41) .
Illustration 36 g01090496
Remove two thrust bearing races (52) and the thrust bearing from the turbine hub (53) .
Illustration 37 g01090502
Remove turbine (54) and turbine hub (53) as a unit from rotating housing (35) .
Illustration 38 g01090508
Remove bolts (55) and the washers from turbine (54) and turbine hub (53) .
Illustration 39 g01090522
Remove turbine hub (53) from turbine (54) .
Illustration 40 g01090526
Remove retaining ring (56) from turbine hub (53) .
Illustration 41 g01090531
Remove two thrust bearing races (57) and thrust bearing (58) from cover assembly (59) .
Illustration 42 g01090549
Remove bolts (61) and the washers from cover assembly (59) .
Remove cover assembly (59) from rotating housing (35) .
Remove ring seal (60) from rotating housing (35) .
Illustration 43 g01090558
Remove sleeve bearing (62) from cover assembly (59) .