4202372 LINE AS Caterpillar parts
C7.1
Rating:
Alternative (cross code) number:
CA4202372
420-2372
4202372
CA4202372
420-2372
4202372
Weight: 0.82 pounds 0 kg.
INDUSTRIAL ENGINE,
This part in 2 request:
Show.
This information for suppliers only!
2023-10-23
2023-09-13
Compatible equipment models: 4202372:
Number on catalog scheme:
10
For full view, you need register
Information:
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01019963
Remove bolts (2) and the washers.
Remove elbow assembly (1) and the O-ring seals from the engine oil cooler.
Remove bolts (7) from the core of engine oil cooler (3) .
Remove bolts (4) and the washers.
Remove bolts (8) and the washers.
Remove the core of engine oil cooler (3) and the O-ring seals from the oil filter base.
Loosen hose clamp (5) on hose assembly (6) . Remove engine oil cooler bonnet (10) and O-ring seal (9) .
Clean the cooler tube bundles in engine oil. Clean the core of engine oil cooler (3) with a rod that has a suitable diameter. Thoroughly clean the tube bundles. Check the oil cooler for cracks or leaks.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01019963
Remove bolts (2) and the washers.
Remove elbow assembly (1) and the O-ring seals from the engine oil cooler.
Remove bolts (7) from the core of engine oil cooler (3) .
Remove bolts (4) and the washers.
Remove bolts (8) and the washers.
Remove the core of engine oil cooler (3) and the O-ring seals from the oil filter base.
Loosen hose clamp (5) on hose assembly (6) . Remove engine oil cooler bonnet (10) and O-ring seal (9) .
Clean the cooler tube bundles in engine oil. Clean the core of engine oil cooler (3) with a rod that has a suitable diameter. Thoroughly clean the tube bundles. Check the oil cooler for cracks or leaks.
Cat SIS web machinery list:
Parts line Caterpillar catalog:
4235444
LINE AS-FUEL
C7.1
C7.1
4235449
LINE AS-FUEL
C7.1
C7.1
4235459
LINE AS-FUEL
C7.1
C7.1
4235463
LINE AS-FUEL
C7.1
C7.1
4235500
LINE
C7.1
C7.1
4235524
LINE
C7.1
C7.1
3388797
LINE AS-FUEL
120M 2, 2384C, 2484C, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 559C, 563C, 573C, 579C, 924K, 930K, 938K, 95...
120M 2, 2384C, 2484C, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 559C, 563C, 573C, 579C, 924K, 930K, 938K, 95...
4205838
LINE AS-FUEL
C7.1
C7.1
4227194
LINE AS-FUEL
C7.1
C7.1
4227195
LINE AS-FUEL
C7.1
C7.1
4227196
LINE AS-FUEL
C7.1
C7.1
4241846
LINE AS
C7.1
C7.1
4202371
LINE AS
323D2 L, 924K, 930K, 938K, C7.1
323D2 L, 924K, 930K, 938K, C7.1
3941087
LINE AS-FUEL
C7.1
C7.1
3940679
LINE AS-FUEL
C7.1
C7.1
3940678
LINE AS-FUEL
C7.1
C7.1
4506643
LINE AS-FUEL
C7.1
C7.1
3996440
LINE AS-FUEL
C7.1
C7.1
3705518
LINE AS-FUEL INJECTION
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
3705517
LINE AS-FUEL INJECTION
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
3798434
LINE AS-FUEL
323D2 L, C7.1
323D2 L, C7.1
4432487
LINE AS-FUEL
C7.1
C7.1
3893786
LINE AS-FUEL
535D, 545D, C7.1
535D, 545D, C7.1