LINE AS-FUEL INJECTION 4P9383 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 337-7965 Loctite
Nickel Anti-Seize Lubricant 1
B 207-1601 Rubber Lubricant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03336865
Illustration 2 g03522998
Turbo mounting flange as viewed facing the turbo exhaust outlet
Position the gasket on the exhaust manifold.
Apply Tooling (A) to the threads of the exhaust manifold studs.
Attach a suitable lifting device to turbocharger (5). The weight of turbocharger (5) is approximately 32 kg (71 lb). Position turbocharger (5) on the exhaust manifold.
Install nuts (9) and tighten to a torque of 55 5 N m (41 4 lb ft) in the sequence shown in Illustration 2.
Illustration 3 g03336859
Apply Tooling (B) to a new seal (1). Install seal (1).
Connect tube assemblies (2), tube assembly (3), tube assembly (4), and tube assembly (7). Note: Do not reuse seal in tube assemblies (8) and (6). Always use the new seals for the assemblies.
Apply Tooling (B) to the new seal and tube assembly (8). Install the seal and tube assembly (8).
Apply Tooling (B) to the new seal and tube assembly (6). Install the seal and tube assembly (6).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct filling procedure.