LINE AS-FUEL INJECTION 7C5398 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Recover/Charge the air conditioning system. Refer to Service Manual, SENR5664, " All Products Air Conditioning and Heating R134a for All Caterpillar Machines" for the recovery and charging procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the correct tools.
Illustration 1 g03643096
Typical Example
Remove panel assembly (1).
Illustration 2 g03714482
Typical Example
Open grill assembly (2).
Illustration 3 g03714490
Remove door (3).
Illustration 4 g03714494
Remove belt (4) from the pulley of refrigerant compressor (5). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace" in order to remove and install belt (4).
Illustration 5 g03714501
Disconnect harness assembly (7).
Disconnect hose assemblies (8).
Remove bolts (6) and the washers. Remove refrigerant compressor (5). Installation Procedure
Install refrigerant compressor (5) in the reverse order of removal.