LINER-CYLINDER BLOCK 1979330 - Caterpillar

A complete list of Caterpillar original equipment paint products is given in this article. The part numbers listed are NOT Caterpillar part numbers. These products are available from your local Caterpillar dealer.
Caterpillar High-Gloss And Medium-Gloss Enamels
Caterpillar High-Gloss Paint is a pure, synthetic solvent enamel suitable for interior or exterior use on earthmoving, construction and material handling equipment, trucks, engines, machinery and metal buildings. This enamel is formulated to produce a finish that sets up in minutes, is tack-free in a few hours and dries overnight to a hard, glossy film that is very resistant to fading, chalking, cracking and chipping. The enamel may be applied directly to either wood or metal without using a primer.
Caterpillar Medium-Gloss Paint is an alkyd resin enamel formulated to produce a durable and scuff-resistant finish that sets up in minutes, is tack-free in a few hours and dries overnight to a hard finish. It has excellent coverage and dries to a smooth, self-leveled film. It is suitable for equipment requiring outside durability. The enamel may be applied directly to metal without using a primer.
Caterpillar Black Muffler Paint
Caterpillar Black Muffler Paint is specifically formulated to withstand temperatures up to 540°C (1000°F). It is an ideal coating for mufflers, exhaust stacks, boiler fronts and can be used on patio lights and barbeque grills. Caterpillar Black Muffler Paint has a built-in rust preventive which will prolong life of the coating and is almost unaffected by sunlight and extreme changes in temperature.
Caterpillar Yellow Primer
Caterpillar Yellow Primer is a pure synthetic, lead-free rust-inhibitive primer sealer that has excellent adhesion and durability. It will dry tack-free in a few hours and overnight to a hard durable coating with excellent weather resistance. It should be recoated with enamel paint. As a shop primer, it can be exposed for longer periods before the finish coat of paint is applied, because it has unusual weather resistance. Bare metal surfaces must be clean and free from all grease, dirt, rust, scale, moisture and other foreign substances before the primer sealer is applied. Effective methods of cleaning a metal surface are through a metal treating process, sand blasting, wire brushing, scraping or buffing.