2358928 LINER Caterpillar parts
311D LRR, 311F LRR, 312D, 312D L, 313D, 315D L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 324D L, 325D, 325D L, 325D MH, 329D...
Rating:
Alternative (cross code) number:
CA2358928
235-8928
2358928
CA2358928
235-8928
2358928
Weight: 1 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 2358928:
Number on catalog scheme:
35
For full view, you need register
Cat SIS web machinery list:
Information:
Test Step 1. Inspect Electrical Connectors And Wiring
Turn the keyswitch to the OFF position.
Thoroughly inspect the connector for the DPF inlet temperature sensor. Refer to Troubleshooting, "Electrical Connectors - Inspect".
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the temperature sensor.
Verify that the latch tab of the connector is correctly latched.
Check the screw for the ECM connector for the correct torque of 6 N m (53 lb in).
Check the harness for abrasions, for pinch points, and for corrosion.Expected Result:All connectors, pins, and sockets are correctly connected. The harness is free of corrosion, of abrasion, and of pinch points.Results:
The connectors and wiring appear to be OK - Proceed to Test Step 2.
There is a fault in the connectors and/or wiring. - Repair: Repair the connectors or wiring and/or replace the connectors or wiring. Ensure that all of the seals are correctly installed and ensure that the connectors are correctly connected.If necessary, perform the "Wiggle Test" on the electronic service tool.Use the electronic service tool in order to clear all logged diagnostic codes and then verify that the repair eliminates the fault.STOPTest Step 2. Check For Active Diagnostic Codes
Connect the electronic service tool
Turn the keyswitch to the OFF position.
Thoroughly inspect the connector for the DPF inlet temperature sensor. Refer to Troubleshooting, "Electrical Connectors - Inspect".
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the temperature sensor.
Verify that the latch tab of the connector is correctly latched.
Check the screw for the ECM connector for the correct torque of 6 N m (53 lb in).
Check the harness for abrasions, for pinch points, and for corrosion.Expected Result:All connectors, pins, and sockets are correctly connected. The harness is free of corrosion, of abrasion, and of pinch points.Results:
The connectors and wiring appear to be OK - Proceed to Test Step 2.
There is a fault in the connectors and/or wiring. - Repair: Repair the connectors or wiring and/or replace the connectors or wiring. Ensure that all of the seals are correctly installed and ensure that the connectors are correctly connected.If necessary, perform the "Wiggle Test" on the electronic service tool.Use the electronic service tool in order to clear all logged diagnostic codes and then verify that the repair eliminates the fault.STOPTest Step 2. Check For Active Diagnostic Codes
Connect the electronic service tool
Parts liner Caterpillar catalog:
14M, 16H, 16M, 3196, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 365B, 365B II, 365B L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627...
12H, 140M, 140M 2, 160M, 160M 2, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 627G, 637D, 637G, 973C, 973D, C-9, C9, CX31-C9I, D6R, D6R II, D6...
623E, 623F, 623G, 793C, 795F AC, 795F XQ, 797, 797B, 797F, M315, M315C, M315D, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M322D MH, MH3049, MH3059
2447812
LINER
345C, 345D, 345D L
345C, 345D, 345D L
2447804
LINER
345C, 345C L
345C, 345C L
2389792
LINER
325D MH, M325D L MH, M325D MH
325D MH, M325D L MH, M325D MH
3137813
LINER
345D, 345D L, 345D L VG, 349D, 349D L
345D, 345D L, 345D L VG, 349D, 349D L
3137816
LINER
345D, 345D L, 345D L VG, 349D, 349D L
345D, 345D L, 345D L VG, 349D, 349D L
3137815
LINER
345D, 345D L, 345D L VG, 349D, 349D L
345D, 345D L, 345D L VG, 349D, 349D L
3301157
LINER
345D, 345D L, 349D, 349D L
345D, 345D L, 349D, 349D L
3301159
LINER
345D, 345D L, 349D, 349D L
345D, 345D L, 349D, 349D L
3301161
LINER
345D, 345D L, 349D, 349D L
345D, 345D L, 349D, 349D L
3039987
LINER
315D L, 318D L, 319D, 319D L, 319D LN
315D L, 318D L, 319D, 319D L, 319D LN
2710017
LINER
315D L, 318D L, 319D, 319D L, 319D LN
315D L, 318D L, 319D, 319D L, 319D LN
2680732
LINER
315D L, 318D L, 319D, 319D L, 319D LN
315D L, 318D L, 319D, 319D L, 319D LN
2680719
LINER
315D L, 318D L, 318D2 L, 319D, 319D L
315D L, 318D L, 318D2 L, 319D, 319D L
2680706
LINER
315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN
315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN
2680705
LINER
315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN
315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN
2738071
LINER
315D L, 319D, 319D L, 319D LN
315D L, 319D, 319D L, 319D LN
2738070
LINER
315D L, 319D, 319D LN
315D L, 319D, 319D LN
2738064
LINER
315D L, 319D, 319D L, 319D LN
315D L, 319D, 319D L, 319D LN
2738063
LINER
315D L, 319D, 319D L, 319D LN
315D L, 319D, 319D L, 319D LN
2738074
LINER
315D L, 319D, 319D L, 319D LN
315D L, 319D, 319D L, 319D LN
2358930
LINER
311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 325D, 325D L, 326...
311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 325D, 325D L, 326...