LINER 2G5578 - Caterpillar

start by: a) remove brake assemblies1. Remove brake springs (1) using tool (A). Remove ring (2), washers and slack adjuster (3).2. Remove camshaft (4) and washer (5).3. Remove seals and bearings from bracket (6).Install Brake Camshafts And Slack Adjusters
1. Install bearings in bracket.2. Install seals in bracket with tooling (A). Install the seals with the lip to the outside.3. Install washer (2) on camshaft (1). Install camshaft (1) in bracket (3). There is a special camshaft for each wheel. Make sure the correct camshaft is installed.4. Install washer, slack adjuster, washer and ring on camshaft.5. Install brake springs using tool (B).end by: a) install brake assemblies