LINER 2S5176 - Caterpillar

2S5176 LINER Caterpillar parts 621, D336

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2S5176
2S-5176
2S5176

Weight: 59 pounds 26 kg.

Buy LINER 2S5176 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE, WHEEL TRACTOR,

This part in 2 request: Show. This information for suppliers only!

#1460611 2s-5176

2024-11-22

#1459192 2S5176

2024-11-19

Compatible equipment models: 2S5176:

MARINE ENGINE D336

WHEEL TRACTOR 621 Caterpillar

Number on catalog scheme: 11

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the rocker arms and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Remove the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector Hydraulic Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove the front cover.
Turn the crankshaft to top center compression stroke for the No. 1 piston. Install the timing bolt in the flywheel. This is for timing during installation.
Illustration 1 g00987503
Ensure that the timing marks on camshaft drive gear (1), the idler gear, and the crankshaft gear are aligned.
Wire the valve lifters away from the camshaft.
Remove bolts (2) and camshaft retainer plate (3) .
Illustration 2 g00987512
Remove camshaft (4) from the cylinder block.