LINER 3828204 - Caterpillar

Illustration 1 g03408821
Illustration 2 g03408822
Table 1
Specification for 201-0566 Camshaft Gp
Item Qty Part Specification Description
A - - Diameter of camshaft bearing journal is 84.850 0.020 mm (3.3405 0.0008 inch).
- - - Lubricate the camshaft bearings with clean engine oil before the installation of camshaft.
- - - Lubricate the camshaft lobes with a 50/50 mixture of 8T-2998 Lubricant and clean engine oil.
1 - - Maximum exhaust lobe lift at zero degrees is 8.515 mm (0.3352 inch).
2 - - Maximum injector lobe lift at zero degrees is 10.445 mm (0.4112 inch).
3 - - Maximum inlet lobe lift at zero degrees is 9.702 mm (0.3820 inch).
4 3 119-0036 Flat Head Screw Torque to 13 3 N m (115 27 lb in).
- - - Use the following procedure to find the actual lobe lift (B):
1. Measure the camshaft lobe height (C).
- - - 2. Measure the base circle (D).
- - - 3. Subtract the base circle measurement in Step 2 from the camshaft lobe height in Step 1. The difference is the actual lobe lift (B).
- - - The maximum permissible difference between the actual lobe lift in Step 3 and the specified camshaft lobe lift of a new camshaft is 0.10 mm ( 0.003 inch).