LINER 3828439 - Caterpillar

Table 2
Panel Group (4)    
Machine    Serial Number    Part Number    
980H     JMS
A8J
MHG     346-1519    
972H     GTA
A7D
A7G
A7J     346-1517    
966H     A6D
TAL
RYF
A6J
A6G     346-1517    
962H     J6J
N4A
MAL
K6K     346-1515    
950H     K5K
JAD
M1G
J5J
M3G
N1A     346-1515    
938H     MJC
JKM
MCC
LKM     346-1513    
IT38H     JNJ     346-1513    
IT62H     M5G     346-1515    Procedure
Illustration 1 g03377571
Left side view of the machine (4) Panel Group
Assemble the correct Panel Group (4) for your machine. Refer to Table 2.
Illustration 2 g03377580
(3) 339-2502 Bracket (4) Panel Group (5) 8T-4121 Hard Washer (6) 8T-4137 Bolt
Assemble Bracket (3) to the Panel Group (4) at the rear of the machine. Use two Hard Washers (5) and two Bolts (6).
Illustration 3 g03377577
(1) 220-4049 Arm As (3) 339-2502 Bracket (7) 8T-4171 Bolt (8) 9X-8256 Washer
Assemble Arm As (1) to Bracket (3). Use two Washers (8) and two Bolts (7) .
Illustration 4 g03377583
(1) 220-4049 Arm As (2) 257-8395 Mirror (A) Torque existing bolts to 3 0.5 N m (2.2 0.4 lb ft)
Assemble Mirror (2) to Arm As (1). Torque existing bolts to 3 0.5 N m (2.2 0.4 lb ft)
Illustration 5 g03377610
(B) Adjusted for operator use (C) Adjusted for shipping purposes
Illustration 6 g03377907
A typical example of Rear Mounted Mirror
Adjust Mirror:
(B) - Allow the operator to view the top of an object 1 m (3.3 ft) to the rear of the center of the counterweight and 1.5 m (5.0 ft) above the ground. Refer to Illustration 5.
(C) - For shipping purposes, rotate Mirror (2) clockwise to 135°. Refer to Illustration 5.