LINES GP-SISHF 0927937 - Caterpillar

Wrap one red hose band (3) around each end of hose assembly (14) .
Attach the straight end of hose (14) to elbow at port "A2". Route opposite end of hose through pump compartment firewall with the rest of the pilot hoses. Route the opposite end up toward the top of the main valve stack (Attachment valve).
Wrap one yellow hose band (4) around each end of hose (15) .
Attach one end of hose (15) to elbow at port "A1". Route opposite end of hose through pump compartment firewall with the rest of the pilot hoses. Route the opposite end up toward the bottom of the main valve stack (Attachment valve).
Illustration 14 g03222556
Main Valve (3) 4I-9521 Marker Band (Red) (4) 4I-9523 Marker Band (Yellow) (14) 104-8774 Hose As (15) 108-7387 Hose As (26) 148-8336 Connector As (28) 148-8378 Elbow As
Remove the existing plug. Install connector (26) into port "PU2" of the "F2" valve.
Attach angled end of hose (15) to the connector at port "PU2". This hose has a yellow band.
Install elbow (28) into port "aR2" of the main control valve.
Attach hose (14) to the elbow at port "aR2". This hose has a red band.
Illustration 15 g03222656
Pilot manifold (1) 4I-1671 Hose As (6) 4I-9524 Marker Band (Brown) (7) 4I-9525 Marker Band (Orange) (10) 5I-4396 Hose As (27) 148-8338 Connector As (28) 148-8378 Elbow As (29) 148-8433 Tee As
Install elbow (28) at ports "PL2", and "bR2" at the bottom of the main valve.
Install connector (27) into port "DR4" of the solenoid valve.
Install tee (29) into connector (27) .
Attach an orange band (7) to each end of hose (1) .
Install the angled end hose (1) to port "PL2" of the "F2" valve.
Install the straight end of hose (1) to the tee at port "DR4" of the solenoid valve.
Attach a brown band (6) to each end of hose (10) .
Install the straight end of hose (10) to port "bR2" of the main valve.
Install the angled end of hose (10) to the end of the tee at port "DR4" of the solenoid valve.
Tighten all hardware and fittings to proper torque unless otherwise specified. Refer to Specifications, SENR3130, "Torque Specifications".
Illustration 16 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect for fluid leaks when the installation of the hydraulic kit is complete.Pilot Hose Connections
Table 2
List of Pilot Hose Connections    
Port Name     Band Color     Hose Number     Port Name    
Attachment Valve     "aR2"     Red     (14)     solenoid