LINES GP-VIBRATORY 1190548 - Caterpillar

Table 1
New Part Number Description Former Part Number(1)
545-5377 Power Train Software Gp 514-0246
557-8633 Implement Software Gp 519-5558
555-3969 Monitor Software Gp 515-9408
555-4034 Monitor Software Gp 515-9422
(1) The former part number listed is for reference only and may differ.Note: The new software is available in the form of a flash file through the Caterpillar Service Information System (SIS). Go to SIS web to make sure that the new flash file part number is still the latest flash file part number. A newer flash file part number may be available. SIS only displays the latest available flash file.Power Train Software
The new Power Train software has various improvements and features that are listed below:
Improved "Help Assistance Feature" by increasing the hold time from one second to five seconds to allow operator time to select the function and read the display.
Improved Rear Engine Transmission Protection Strategy to limit machine operation while rear engine is not running: - If rear engine is not running and shift lever is not in neutral, event code 1240 level 2S will be active and logged. - If rear engine is not running after 2 seconds of machine movement, limit front transmission gear to 1st or 2nd gear. Along with that the front engine speed is limited to 1100 RPM. - If rear engine is not running after 15 seconds of machine movement, event code 1240 level 3 will be active and logged, a warning will be displayed.
Improved notification strategy for Access Ladder Lowered. Event code 1337 for active only and event code 2337 for active logged.
Updated to set Tire Spin Reduction feature default status to be disabled for Coal Bowls machines.Implement Software Group
The new Implement software has various improvements and features that are listed below:
Improved "Help Assistance Feature" by increasing the hold time from one second to five seconds, to allow operator time to select the function and read the display.
Improved grade control performance related to the cut/fill guidance value accuracy, after completing a tight machine turn or completing a turn with the machine on a side slope.
Improved response time for the cut/fill guidance values to be accurate after navigating through challenging terrain has been shortened.
Updated to support for the new Cat Production Management optional attachment.
Improved cushion hitch leveling strategy for better solenoid response before and after hitch lockdown, when the parking brake is applied.Monitor Software Group - High Regulation Country (HRC) Machines
The new Monitor software group has various improvements and features that are listed below:
Updated to support E1240 event code (machine in motion with rear engine stopped).
Updated to support E2377 event code (access ladder lowered