LINES GP-GREASE 1247757 - Caterpillar

Remove hose 165-4769 Hose Assembly (A), 279-6580 Hose Assembly (B) and clip (C) .
Illustration 2 g01719408
Illustration 3 g01719373
Install 2T-3011 Hose Assembly (D). Install 134-3988 Clip (E) onto hose (D). Install clip (E) and existing harness clip (F) onto the lower left mount of the Electronic Control Module. Use the original bolt from the ECM and a 8T-4224 Hard Washer (G) .
Illustration 4 g01720007
Detailed view of 319-4903 Bracket Assembly
Illustration 5 g01716335
Right side view of engine
Install the 317-6752 Tube Assembly (H). Install 319-4903 Bracket Assembly (J) to the engine block. Use a 8T-4192 Bolt (K) and 8T-4223 Hard Washer (L). Install 5K-9660 Clip (M) to tube (H). Install clip (M) to bracket (J). Use a 8T-4136 Bolt (N) and 8T-4121 Hard Washer (P) .Replacement of 268-3755 Hose Assembly
Illustration 6 g01716336
Rear view of engine (machine)
Illustration 7 g01716339
Rear view of engine (machine)
Remove clips (R). Remove clip (S). Retain clip (S). Remove 268-3755 Hose Assembly (T) and remove elbow (V) .
Illustration 8 g01716341
Right side view of engine
Disassemble fittings (V) and (W). Remove bracket (X). Retain all the hardware. Discard bracket (X) .
Illustration 9 g01716342
Right side view of engine
Install 322-4659 Bracket (Y). Use the hardware from Step 2. Reassemble fitting (V) and fitting (W) through the 322-4659 Bracket (Y). Install 124-0195 Elbow (Z), 5K-9090 O-Ring Seal (AA) and 6V-9746 O-Ring Seal (BB) to bracket (V) .
Illustration 10 g01716343
Rear view of engine (machine)
Install 315-1418 Tube Assembly (CC). Reinstall clip (S) to tube (CC) .
Illustration 11 g01716344
Rear view of engine (machine)
. Install 2T-2098 Hose Assembly (DD). Install 6V-1889 Clip (EE). Use a 296-6980 Spacer (FF), 8T-4121 Hard Washer (GG) and 8T-6466 Bolt (HH) .