LINES GP-AIR CONDITIONER 1409634 - Caterpillar

Illustration 5 g03711557
Touch "Steering Wheel" (10).
Illustration 6 g03711582
Touch "Left Station" (11) or "Right Station" (12). Note: The following steps describe the procedure used to calibrate the steering on the left operator station. The procedure for checking and adjusting the steering on the right operator station is similar.
Illustration 7 g03711602
Read the on-screen warnings (13), touch "OK" icon (14).
Illustration 8 g03711607
Touch "OK" icon (14) to begin the calibration.
Illustration 9 g03711618
Follow setup instructions (15).
Illustration 10 g03711629
Shut off the engine. Press and hold push to start switch (16) for 3 seconds. An LED next to the push to start switch will flash when the engine is in shutdown mode. Note: The engine may run for several minutes when placed in the shutdown mode.
Press operator station selector switch (17) on the left operator station in order to select the left operator station.
Illustration 11 g03711636
When setup instructions are met, touch next icon (18).
Illustration 12 g03711671
Follow calibration instructions (19).
Illustration 13 g03711687
Turn steering wheel (20) on the left operator station counter-clockwise and hold against the left spring.
Illustration 14 g03711697
Touch "Next" icon (18).
Illustration 15 g03711707
Follow calibration instructions (21).
Turn steering wheel (20) on the left operator station clockwise and hold against the right spring.
Illustration 16 g03711719
Touch "Next" icon (18).
Illustration 17 g03711724
The display should now read "Calibration Successful" (22). Touch "OK" icon (14).
Repeat Step 2 through Step 13 to calibrate the right operator station.
Illustration 18 g03711738
Touch home icon (23) to exit the calibration screen.
Illustration 19 g03733476
Move machine power switch (24) to the OFF position.