1455876 LINES GP-AIR CONDITIONER Caterpillar parts
330B L
Rating:
Alternative (cross code) number:
CA1455876
145-5876
1455876
CA1455876
145-5876
1455876
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$10.91
29 Jan 2022
CN: Zhi Min Guo Ji
Radiator Cap，Compatible with 16401-63010 16401-71010 16401-73010 1306J1 051-027-001
ZIMGLOBAL Brand new and never used parts. Made of high-quality materials that meet OE standards. || It is extremely important to always make sure to allow the engine to cool down before removing the radiator cap, as removing the cap from a hot system can cause sudden coolant spray and severe burns. A faulty radiator cap can have a huge impact on the cooling performance of your vehicle, once you have a replacement and your engine is cool, simply unscrew the old cap, and install the new by screwing it on. || OEM：1306J1 / 1351958 / 1455876 / 1609680180 / 1640187402000 / 1647187402000 / 4026783 / 4137897 / F87H8100AA/16401-15210, 16401-15210-000, 16401-54750, 16401-63010, 16401-71010, 16401-73010, 16401-74170, 16401-87401, 16401-87401-000, 16401-87602-000, 16401-87710, 16401-87710-000, 16401-87711, 16401-87711-000, 16401-87712, 16401-87712-000 || Honda Kia Mazda Nissan Opel Hyundai Toyota Suzuki || Regulators-Built to strict quality control standards, 1 years warranty, hassle-free return and money back policy, buy with confidence!
ZIMGLOBAL Brand new and never used parts. Made of high-quality materials that meet OE standards. || It is extremely important to always make sure to allow the engine to cool down before removing the radiator cap, as removing the cap from a hot system can cause sudden coolant spray and severe burns. A faulty radiator cap can have a huge impact on the cooling performance of your vehicle, once you have a replacement and your engine is cool, simply unscrew the old cap, and install the new by screwing it on. || OEM：1306J1 / 1351958 / 1455876 / 1609680180 / 1640187402000 / 1647187402000 / 4026783 / 4137897 / F87H8100AA/16401-15210, 16401-15210-000, 16401-54750, 16401-63010, 16401-71010, 16401-73010, 16401-74170, 16401-87401, 16401-87401-000, 16401-87602-000, 16401-87710, 16401-87710-000, 16401-87711, 16401-87711-000, 16401-87712, 16401-87712-000 || Honda Kia Mazda Nissan Opel Hyundai Toyota Suzuki || Regulators-Built to strict quality control standards, 1 years warranty, hassle-free return and money back policy, buy with confidence!
For full view, you need register
Compatible equipment models: 1455876:
Information:
Drain
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Open the cooling system drain valve (if equipped). If the cooling system is not equipped with a drain valve, remove the cooling system drain plugs.Allow the coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Caterpillar Dealer Service Tool Group:Outside Illinois: 1-800-542-TOOLInside Illinois: 1-800-541-TOOLCanada: 1-800-523-TOOLFlush
Flush the cooling system with clean water in order to remove any debris.Note: If equipped, be sure to flush the heater and any related supply and return lines.
Close the drain valve (if equipped). Clean the drain plugs. Install the drain plugs. For the proper torque, refer to the Specifications Manual, SENR3130, "Torque Specifications".
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with clean water. Install the cooling system filler cap.
Start and run the engine at low idle until the temperature reaches 49 to 66 °C (120 to 150 °F).
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap. Open the drain valve (if equipped) or remove the cooling system drain plugs. Allow the water to drain. Flush the cooling system with clean water. Close the drain valve (if equipped). Clean the drain plugs. Install the drain plugs. For the proper torque, refer to the Specifications Manual, SENR3130, "Torque Specifications".Fill
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with Extended Life Coolant (ELC). See Special Publication, SEBU6385, "Caterpillar On-highway Diesel Truck Engine Fluids Recommendations" for more information on cooling system specifications. Do not install the cooling system filler cap.
Start and run the engine at low idle for 5 minutes. Then, increase the engine rpm to high idle. Run the engine at high idle for one minute in order to purge the air from the cavities of the engine block.
Check the coolant level. Maintain the coolant level within 13 mm (0.5 inch) below the bottom of the pipe for filling. Maintain the coolant level within 13 mm (0.5 inch) to the proper level on the sight glass (if equipped).
Clean the cooling system filler cap. Inspect the gasket that is on the cooling system filler cap. If the gasket that is on the cooling system filler cap is damaged, discard the
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Open the cooling system drain valve (if equipped). If the cooling system is not equipped with a drain valve, remove the cooling system drain plugs.Allow the coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Caterpillar Dealer Service Tool Group:Outside Illinois: 1-800-542-TOOLInside Illinois: 1-800-541-TOOLCanada: 1-800-523-TOOLFlush
Flush the cooling system with clean water in order to remove any debris.Note: If equipped, be sure to flush the heater and any related supply and return lines.
Close the drain valve (if equipped). Clean the drain plugs. Install the drain plugs. For the proper torque, refer to the Specifications Manual, SENR3130, "Torque Specifications".
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with clean water. Install the cooling system filler cap.
Start and run the engine at low idle until the temperature reaches 49 to 66 °C (120 to 150 °F).
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap. Open the drain valve (if equipped) or remove the cooling system drain plugs. Allow the water to drain. Flush the cooling system with clean water. Close the drain valve (if equipped). Clean the drain plugs. Install the drain plugs. For the proper torque, refer to the Specifications Manual, SENR3130, "Torque Specifications".Fill
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with Extended Life Coolant (ELC). See Special Publication, SEBU6385, "Caterpillar On-highway Diesel Truck Engine Fluids Recommendations" for more information on cooling system specifications. Do not install the cooling system filler cap.
Start and run the engine at low idle for 5 minutes. Then, increase the engine rpm to high idle. Run the engine at high idle for one minute in order to purge the air from the cavities of the engine block.
Check the coolant level. Maintain the coolant level within 13 mm (0.5 inch) below the bottom of the pipe for filling. Maintain the coolant level within 13 mm (0.5 inch) to the proper level on the sight glass (if equipped).
Clean the cooling system filler cap. Inspect the gasket that is on the cooling system filler cap. If the gasket that is on the cooling system filler cap is damaged, discard the
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts lines Caterpillar catalog:
7C4634
LINES GP-AIR
330, 330B, 330B L, E240, W330B
330, 330B, 330B L, E240, W330B
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 235C, 235D, 330, 330 FM L, 330 L, 3306, 3306B, 330B L, 528, 528B, 530B, 545, 611...
330B, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D2 L
1340759
LINES GP-GREASE
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL
1158693
LINES GP-BUCKET CYLINDER
322B, 322B L, 322B LN, 322C, 325B, 325B L, 325C, 330B, 330B L, 330C, 330C FM, 330C L, 385B, 385C L
322B, 322B L, 322B LN, 322C, 325B, 325B L, 325C, 330B, 330B L, 330C, 330C FM, 330C L, 385B, 385C L
1627458
LINES GP-PUMP
330B L
330B L
1924377
LINES GP-PILOT
322B L, 325B L, 330B L
322B L, 325B L, 330B L
1597436
LINES GP-BOOM CYLINDER
330B L, 330C FM, 330D FM
330B L, 330C FM, 330D FM
1384657
LINES GP-BOOM
330B L
330B L
1489072
LINES GP-AIR CONDITIONER
322B L, 325B L, 330B L
322B L, 325B L, 330B L
1459136
LINES GP-FRONT
330B L
330B L
1967261
LINES GP-FRONT
330B L
330B L
4154364
LINES GP-FRONT
308E2 CR
308E2 CR
1353494
LINES GP-LIFT CYLINDER
416C, 426C, 428C, 436C, 438C
416C, 426C, 428C, 436C, 438C
2786846
LINES GP-FRONT
321D LCR
321D LCR
1046043
LINES GP-HEATER
416C, 426C, 428C, 436C, 438C
416C, 426C, 428C, 436C, 438C
3794732
LINES GP-FRONT
303.5E
303.5E
2807604
LINES GP-BLADE
304C CR, 305.5D, 305.5E, 305C CR, 305D CR, 305E
304C CR, 305.5D, 305.5E, 305C CR, 305D CR, 305E
1312962
LINES GP-HAMMER
312, 315, 63
312, 315, 63
3426224
LINES GP-WATER
349E, 349E L, 349E L HVG, 349E L VG, 349F L, C13, CX31-C13I
349E, 349E L, 349E L HVG, 349E L VG, 349F L, C13, CX31-C13I