1564590 LINES GP-PUMP Caterpillar parts
D5N
Rating:
Alternative (cross code) number:
CA1564590
156-4590
1564590
CA1564590
156-4590
1564590
TRACK-TYPE TRACTOR,
Compatible equipment models: 1564590:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 5P-1733 Seal Locator 1
5P-1737 Bolt 3
9S-8858 Nut (Seal Installer) 1
6V-6142 Seal Installer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The crankshaft front seal and the wear sleeve must be replaced at the same time. Once the crankshaft front seal and the wear sleeve are separated, these components cannot be used again.Note: Do not use any type of lubricant during the installation of the crankshaft front seal and the wear sleeve.
Clean the outside diameter of the crankshaft.
Illustration 1 g01116116
Use Tooling (B) to install crankshaft front seal (1) and wear sleeve (2). Note: Install the crankshaft front seal with the arrow that shows the direction of crankshaft rotation toward the front of the engine.End By:
Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
B 5P-1733 Seal Locator 1
5P-1737 Bolt 3
9S-8858 Nut (Seal Installer) 1
6V-6142 Seal Installer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The crankshaft front seal and the wear sleeve must be replaced at the same time. Once the crankshaft front seal and the wear sleeve are separated, these components cannot be used again.Note: Do not use any type of lubricant during the installation of the crankshaft front seal and the wear sleeve.
Clean the outside diameter of the crankshaft.
Illustration 1 g01116116
Use Tooling (B) to install crankshaft front seal (1) and wear sleeve (2). Note: Install the crankshaft front seal with the arrow that shows the direction of crankshaft rotation toward the front of the engine.End By:
Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Caterpillar SIS machinery equipment:
Caterpillar SIS
D5N XL, LGP TRACK-TYPE TRACTOR AGG00001-UP (MACHINE) POWERED BY 3126B Engine »
156-4590
LINES GP-PUMP
D5N XL, LGP TRACK-TYPE TRACTOR AGG00001-UP (MACHINE) POWERED BY 3126B Engine »
156-4590
LINES GP-PUMP
D5N XL, LGP TRACK-TYPE TRACTOR AGG00001-UP (MACHINE) POWERED BY 3126B Engine »
156-4590
LINES GP-PUMP
D5N XL, LGP TRACK-TYPE TRACTOR AGG00001-UP (MACHINE) POWERED BY 3126B Engine »
156-4590
LINES GP-PUMP
D5N TRACK-TYPE TRACTOR /XL, LGP, POWER SHIFT/ CFH00001-UP (MACHINE) POWERED BY 3126B ENGINE »
156-4590
PUMP LINES GROUP
D5N TRACK-TYPE TRACTOR /XL, LGP, POWER SHIFT/ CFH00001-UP (MACHINE) POWERED BY 3126B ENGINE »
156-4590
PUMP LINES GROUP
D5N TRACK-TYPE TRACTOR /XL, LGP, POWER SHIFT/ CFH00001-UP (MACHINE) POWERED BY 3126B ENGINE »
156-4590
PUMP LINES GROUP
D5N TRACK-TYPE TRACTOR /XL, LGP, POWER SHIFT/ CFH00001-UP (MACHINE) POWERED BY 3126B ENGINE »
156-4590
PUMP LINES GROUP
D5N TRACK-TYPE TRACTOR /XL, LGP, POWER SHIFT/ CFH00001-UP (MACHINE) POWERED BY 3126B ENGINE »
156-4590
PUMP LINES GROUP
D5N TRACK-TYPE TRACTOR /XL, LGP, POWER SHIFT/ CFH00001-UP (MACHINE) POWERED BY 3126B ENGINE »
156-4590
PUMP LINES GROUP
Caterpillar parts catalog:
Parts lines Caterpillar catalog:
1591814
LINES GP-WATER
561N, 953C, 963C, D5N, D6N
561N, 953C, 963C, D5N, D6N
1985178
LINES GP-DIAGNOSTIC
561N, D5N
561N, D5N
2023262
LINES GP-TURBOCHARGER OIL
561N, D5N, D6N
561N, D5N, D6N
1569072
LINES GP-FUEL
561N, D5N
561N, D5N
2463546
LINES GP-WATER
561N, 953C, 963C, D5N, D6N
561N, 953C, 963C, D5N, D6N
1719592
LINES GP-HEATER
D5N, D6N
D5N, D6N
2223800
LINES GP-HEATER
D5N, D6N
D5N, D6N
1558515
LINES GP-AIR
G3520B
G3520B