LINES GP-SECONDARY STEERING 1716458 - Caterpillar

Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.Start By:
Remove the fuel cooler.
Remove the aftercooler.
Remove the fuel pressure sensor.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High-Pressure Fuel Lines" for safety information.Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant. Refer to Operation and Maintenance Manual, "Coolant System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g06269490
Illustration 2 g06269492
Illustration 3 g06269494
Illustration 4 g06269495
Illustration 5 g06269496
Illustration 6 g06269497
Illustration 7 g06269499Installation Procedure
Install the engine oil cooler in the reverse order of removal.
Illustration 8 g06269502
Illustration 9 g06269503
Tightening sequence for the bolts.
Illustration 10 g06269507