LINES GP-TURBOCHARGER OIL 1W0558 - Caterpillar

TYPE="TABLE" @@@-->
Illustration 1 g02542337
Table 1
Specification for the 174-5986 Water Pump Gp, 161-0969 Water Pump Gp, and 100-9347 Water Pump Gp
Item Qty Part Specification Description
1 1 9M-3786 O-Ring Seal Lubricate the bore of the O-ring seal lightly with 5P-3975 Rubber Lubricant.
2 1 0S-1591 Bolt Torque to 39 3 N m (29 2 lb ft).
3 1 349-2654 Water Pump Seal With an installation tool, press the water pump seal onto the water pump shaft until the stationary cup is fully seated inside the pump housing.
4 1 153-1256 Lip Type Seal By using an installation tool, install the lip type seal with the primary lip toward water pump drive gear. Press the lip type seal with a press until the lip type seal is flush with the face inside the housing. Do not install the lip type seal by hand.
A 1 135-4928 Water Pump Shaft Diameter of the water pump shaft at the carbon seal assembly seat area is 19.100 0.010 mm (0.7520 0.0004 inch).