LINES GP-WATER 2078057 - Caterpillar

Illustration 6 g03455324Pressing the exclamation point will return all snoozed messages to the list so the operator can scroll through the warnings again.Reference: For more Information on Active Diagnostics Events, and Terrain Avoidance Level Warnings Window refers to the Operation and Maintenance Manual, SEBU8519, "Operator Assist Systems".Main Screen Indicators on the Status Bar
Illustration 7 g03875579
Indicators on the status bar
The area beneath the gauge cluster is for the following symbols based on the symbols reported statuses from the connected machine.The statuses to display are from left to right:
AutoRip - This indicator is illuminated when the AutoRip mode is active.
AutoStow - This indicator is illuminated when the AutoStow mode is active.
Auto Down Shift - This indicator is illuminated when the auto down shift operation is enabled.
Bi-Directional Auto Shift - This indicator is illuminated when the Bi-Directional Auto shift operation is enabled.
AutoCarry - This indicator is illuminated when the AutoCarry is enabled.
Auto Blade Assist - This indicator is illuminated when the Auto Blade Assist operation is enabled.
Blade Float Active - This indicator is illuminated when the Blade Float Active operation is active.
Single Tilt Active - This indicator is illuminated when the Single Tilt operation is active.
Dual Tilt Active - This indicator is illuminated when the Dual Tilt operation is active.
Cat Grade Control Selected - This indicator is illuminated when the Cat Grade Control operation is active.
Operator Not In Seat - This indicator is illuminated when the Operator is not activating the In-Seat Sensor.Indicator Lights Mounted on Machine
Illustration 8 g03435636
Illustration 9 g06018103
(3) Yellow indicator lamp
(4) Red indicator lamp
(5) Green indicator lamp
(6) Blue indicator lampThe lamps indicate the following:Green - Manual Mode or Manual Override ModeYellow - Approaching Avoidance ZoneRed - Active Stop IndicationBlue - RC Status IndicatorThere are four different colored indicators in two groups located on-board the machine on either side of the cab.The blue indicator is the RC status indicator. The RC status indicator is either ON or flashing in a heartbeat (double-beat) pattern.When the machine is switched from manual to RC on GLSC, both sets of 4 indicator lights will briefly illuminate to indicate that the lights are functional.The yellow and red indicators are used with Terrain avoidance zones (optional).The red indicator is used either when:
Avoidance Stop active (with avoidance installed)
A Remote Shutdown is commanded
A Software Stop is active
An A-Stop is activeWhen a Remote Shutdown is commanded or a Software Stop is active, the Red indicator flashes twice per second and the RC Status (Blue) indicator is solid.The Green indicator is on (solid) when the machine is either in manual mode or manual override mode and the cab key-switch is turned on.