2130974 LINES GP-HYDRAULIC PUMP Caterpillar parts
303
Rating:
Alternative (cross code) number:
CA2130974
213-0974
2130974
CA2130974
213-0974
2130974
MINI HYD EXCAVATOR,
Compatible equipment models: 2130974:
Number on catalog scheme:
For full view, you need register
Information:
Operation of the Soft Keys
A soft key can describe the operation that is performed when the soft key is pressed. For example, the soft key ("Zoom Machine") when pressed, will zoom in order to show the machine on the screen.A soft key can change the selection of options, or a soft key can show the selection of a file or setting. The top line of a soft key ends with a colon and the bottom line shows the current option or setting. For example, the soft key (machine direction) shows the direction that the machine is travelling. The current direction (forward or reverse) shows on the bottom line of the soft key.Hard Keys
Hard keys are the 17 physical keys on the CD550 display. Use the hard keys in order to operate the soft keys and the functions of the soft keys.Arrow Keys
The arrow keys are used to carry out the following functions.
Move within menus and lists.
Enter text or numbers into data entry fields in dialogs.
Pan the plan view and the cross section view.Navigating Within Menus and Lists
Proceed through the following steps in order to choose an item from a menu or a list.
Press the down arrow key or the up arrow key in order to highlight the desired option.
Press the "OK" key.Entering Data
When you are in the text fields and the number fields in any of the dialogs, press the up arrow key or the down arrow key in order to scroll through the available characters. Press the left arrow key or the right arrow key in order to move between characters. Refer to Operation and Maintenance Manual, "Working with Dialogs" for more information.Panning Around the Screen
Press the arrow keys in order to control the position of the plan view or cross section view screen.
Press the right arrow key in order to move the view to the right.
Press the left arrow key in order to move the view to the left.
Press the up arrow key in order to move the view upward.
Press the down arrow key in order to move the view downward.Auto Pan
Auto pan immediately brings the symbol for the machine back on to the screen when auto pan is enabled. This occurs if the symbol for the machine is driven off the screen or if manual panning takes the symbol for the machine off the screen. The soft key (auto pan) reads "Auto Pan: On" when auto pan is on. To turn off auto pan, press the soft key (auto pan). The soft keys' label changes from "Auto Pan: On" to "Auto Pan: Off".Display Brightness
The brightness of the display can be adjusted with the hard keys. In order to increase the brightness of the display, hold down the "MENU" key and press the "+" key. In order to decrease the brightness of the display, hold down the "MENU" key and press the "-" key.Data Card and Data Storage
When
A soft key can describe the operation that is performed when the soft key is pressed. For example, the soft key ("Zoom Machine") when pressed, will zoom in order to show the machine on the screen.A soft key can change the selection of options, or a soft key can show the selection of a file or setting. The top line of a soft key ends with a colon and the bottom line shows the current option or setting. For example, the soft key (machine direction) shows the direction that the machine is travelling. The current direction (forward or reverse) shows on the bottom line of the soft key.Hard Keys
Hard keys are the 17 physical keys on the CD550 display. Use the hard keys in order to operate the soft keys and the functions of the soft keys.Arrow Keys
The arrow keys are used to carry out the following functions.
Move within menus and lists.
Enter text or numbers into data entry fields in dialogs.
Pan the plan view and the cross section view.Navigating Within Menus and Lists
Proceed through the following steps in order to choose an item from a menu or a list.
Press the down arrow key or the up arrow key in order to highlight the desired option.
Press the "OK" key.Entering Data
When you are in the text fields and the number fields in any of the dialogs, press the up arrow key or the down arrow key in order to scroll through the available characters. Press the left arrow key or the right arrow key in order to move between characters. Refer to Operation and Maintenance Manual, "Working with Dialogs" for more information.Panning Around the Screen
Press the arrow keys in order to control the position of the plan view or cross section view screen.
Press the right arrow key in order to move the view to the right.
Press the left arrow key in order to move the view to the left.
Press the up arrow key in order to move the view upward.
Press the down arrow key in order to move the view downward.Auto Pan
Auto pan immediately brings the symbol for the machine back on to the screen when auto pan is enabled. This occurs if the symbol for the machine is driven off the screen or if manual panning takes the symbol for the machine off the screen. The soft key (auto pan) reads "Auto Pan: On" when auto pan is on. To turn off auto pan, press the soft key (auto pan). The soft keys' label changes from "Auto Pan: On" to "Auto Pan: Off".Display Brightness
The brightness of the display can be adjusted with the hard keys. In order to increase the brightness of the display, hold down the "MENU" key and press the "+" key. In order to decrease the brightness of the display, hold down the "MENU" key and press the "-" key.Data Card and Data Storage
When
